Spec Boxster Build

[thstone]

I had the alignment done this week and went with -3.8 front and -2.9 rear camber. Zero toe front and +5' in rear. Threw on a new set of Toyo RR's and I am off to Willow Springs for a weekend of racing!

[Gilles]

Originally Posted by thstone

I had the alignment done this week and went with -3.8 front and -2.9 rear camber. Zero toe front and +5' in rear. Threw on a new set of Toyo RR's and I am off to Willow Springs for a weekend of racing!

Tom, where do you get your alignment done?
I replaced my control arms and need some one closer than Steve A. in Torrance.
Thanks!

[thstone]

Originally Posted by Gilles

Tom, where do you get your alignment done?
I replaced my control arms and need some one closer than Steve A. in Torrance.
Thanks!

I have Pro Motorsports in Burbank do the alignments. But that would appear to be in the wrong direction if you live in OC.

You might want to Vision Motorsports in Laguna Hills. Dwain Dement is the owner and is very, very knowledgeable.

[Gary R.]

Originally Posted by thstone

I had the alignment done this week and went with -3.8 front and -2.9 rear camber. Zero toe front and +5' in rear. Threw on a new set of Toyo RR's and I am off to Willow Springs for a weekend of racing!

Tom - notice any difference with the new alignment?

[steved0x]

Originally Posted by Gary R.

Tom - notice any difference with the new alignment?

Some more details on the results of the alignment here:

Spec Boxster Build

Edit: I didn't realize I was linking to the same thread Look up a couple of posts