Parting out a whole lot of Boxsters - Page 36 - 986 Forum - The Community for Porsche Boxster & Cayman Owners

BirdDog · 06-04-2016, 05:23 AM

Woody - sorry, never mind. I think I'm just going to have to go with new parts.

GTsilber · 06-05-2016, 03:15 PM

Quote:

Originally Posted by itsnotanova

I think rockauto has them new for $15 each.

I have the early style cup holder for $50+shipping. I can send you a picture if you text me at 512-925-9171

FYI, I'll be closed 6/4-6/15. Going back home to do some king salmon fishing on the Deshka.

They do but the OEM are $30 each! Guess I could go with the non-oem for this non critical part.

Sent from my SM-G935T using Tapatalk

itsnotanova · 06-06-2016, 05:03 AM

Quote:

Originally Posted by GTsilber

They do but the OEM are $30 each! Guess I could go with the non-oem for this non critical part.

Sent from my SM-G935T using Tapatalk

Other guys have had good luck with them.

schwank · 06-08-2016, 01:08 PM

I am looking for one part that evidently can only be had new if you pay stupid money to ship from Germany.

The part:

OEM-99635517610
Genuine Porsche Part: AS BRAKE LINE

This is the hard brake line that runs across the front of the car from the distribution block on the front driver's side to the front passenger brake caliper. Mine was damaged during removal.

I know you are away on vacation, but even if I want new parts this would take probably 6 weeks to arrive so you would still beat their availability. Thanks!

Thumper · 06-01-2016, 09:27 AM

I'm upgrading my base to S specs and about the last thing left to do is to change out the coolant tubes to the larger S tubes. Mine is a tip with the 3rd radiator. I stole a pic from another of your threads

I live in the DFW area and can drive down to pick them up if you have them. Let me know a price and if you have a really nice set available.

Thanks,

Jeff

itsnotanova · 06-01-2016, 10:07 AM

Quote:

Originally Posted by Thumper

I'm upgrading my base to S specs and about the last thing left to do is to change out the coolant tubes to the larger S tubes. Mine is a tip with the 3rd radiator. I stole a pic from another of your threads

I live in the DFW area and can drive down to pick them up if you have them. Let me know a price and if you have a really nice set available.

Thanks,

Jeff

Hi Jeff,
I have a set for $150. It's the main tubes with all the mounting bracket and the second set of larger aluminum tubes behind the radiators.
Thanks Woody

Thumper · 06-01-2016, 11:16 AM

Woody,

Sounds good. I'll take them. Can't make it this weekend, and I know you'll be on vacation till after the 15th. I'll touch base with you after you get back to schedule a trip down to pick them up. Unless you're heading north anytime soon......:-)

I can send funds now to hold them, or bring cash when I come to get them. Your choice.

Thanks,

Jeff

bryanj23 · 06-05-2016, 11:59 AM

I'm looking for a set of cats for my 1998 base. Do you have a set?

itsnotanova · 06-05-2016, 01:24 PM

I have a set with 65k for $100 plus shipping

Borin · 06-10-2016, 10:01 AM

I need cup holders and a driver-side floor mat for an '01 986, if you have it.

jpc763 · 06-11-2016, 08:09 PM

Woody, do you have a working headlight switch?

Need_for_speed · 06-13-2016, 07:27 AM

Hi Woody. Hope fishing was awesome. Looking for a little bitty pink plastic torx screw retaining nut. I was replacing my headlight switch, and when I pulled the side vent portion of the dash off to gain access, one of these little pink clips launched itself into the dash somewhere. Cannot find it, so would like to see if you could send me a couple of them. In the photo below, the red arrow points at one of them. There are three that hold this section of the dash -- two on the side by the door, and the one in the photo in the switch bezzle. the T15 Torx screws screw into them. They have a clip that slides over the hole in the metal portion of the dash framework. Thanks!

Disaster · 06-13-2016, 10:09 AM

986 561 789 02 Upgrading '98 to newer trans and need fasteners.

drew44 · 06-15-2016, 07:19 AM

Quote:

Originally Posted by Need_for_speed

Hi Woody. Hope fishing was awesome. Looking for a little bitty pink plastic torx screw retaining nut. I was replacing my headlight switch, and when I pulled the side vent portion of the dash off to gain access, one of these little pink clips launched itself into the dash somewhere. Cannot find it, so would like to see if you could send me a couple of them. In the photo below, the red arrow points at one of them. There are three that hold this section of the dash -- two on the side by the door, and the one in the photo in the switch bezzle. the T15 Torx screws screw into them. They have a clip that slides over the hole in the metal portion of the dash framework. Thanks!

Looking for 1 or 2 of those little clips myself...if you have any other after you take care of Need_ let me know please. Thanks!!

flouese · 06-16-2016, 04:26 PM

Good Evening Woody,

Looking for a big handful of all types front and rear trunk carpet fasteners. Can you help?

chromecarz00 · 06-20-2016, 04:17 PM

Hello, do you have a clock spring?

Also, the clear-bottom headlights with the amber reflector from the newer boxsters?

Convertible top?

Any wheels?

Radar · 06-21-2016, 03:22 PM

I'm looking for the bezel to mount the climate controls up above the radio. Happen to have one?

GTsilber · 06-23-2016, 04:43 PM

Looking for the plastic weather strip that goes around the driver side headlight...

Sent from my SM-G935T using Tapatalk

itsnotanova · 06-23-2016, 08:21 PM

Quote:

Originally Posted by GTsilber

Looking for the plastic weather strip that goes around the driver side headlight...

Sent from my SM-G935T using Tapatalk

Only chance you have of finding one of those is off a boxster that doesn't see much daylight. Down here in Texas, that rubber piece is either broken off or turns into a tar like substance. Nobody sells them new either

I took them off mine and it really isn't that noticeable.

particlewave · 06-23-2016, 11:00 PM

Quote:

Originally Posted by itsnotanova

Only chance you have of finding one of those is off a boxster that doesn't see much daylight. Down here in Texas, that rubber piece is either broken off or turns into a tar like substance. Nobody sells them new either

I took them off mine and it really isn't that noticeable.

Frost King double D self adhesive foam rubber. Cut the arch portion off of one of the "D"s to make it a "p" strip. Works decent

This picture is deceptive...the two "D" strips are actually connected (you have to tear or cut them to seperate). Just don't seperate them and cut the arch off one of the strips so you have more surface area for adhesion and place it so that the remaining "D" is at the rim of the headlight.