Thanks, guys.
I'll definitely drop the engine and transmission as a unit (despite naively stating in an early post that I wanted to leave the transmission in, like I've done with conventional engines). I planned to drop the engine onto a low-profile dolly, but I've gotten the impression that, even if I remove the rear bumper cover and muffler (and fuel tank?), I'll still need more clearance to get the engine out. Bummer. What lift point would I use to lift the rear end of the car with a hoist? I have chains and a couple of beefy ratchet straps at my disposal.
I've been studying the chapter about engine removal in 101 Projects, which has a fairly comprehensive step-by-step how-to for disconnecting stuff in the engine compartment and underneath the car. I thought I'd compare it with other folks' procedures, as belt and suspenders. I also have the service manual. The videos I've watched tend to be superficial, skipping over lots of important stuff. Maybe I haven't found the right video yet.
Newsguy, I salivate when I look at 2-post lifts. It's a must-have tool. Someday...
__________________
2000 986 base
Arctic Silver/black
2.7 liter
5-speed manual
|