Actually get 2 torque wrenches. Many bolts torque to only 7 ft/lb. The 1/2" wrenches only goes down to 20 or 40 ft/lb. Get a good 3/8" and 1/2.
If it doesnt break the bank buy a good set of ratcheting (gearwrench) open/box-end wrenches 8-19mm every size check for the closeness of the ratchet click the smaller movement the better.
These 2 tool are very helpful if working on the suspension. Left tool to pull the control arms and toe links. The right tool mounted to the wheel hub will pop the axles easily.
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
Last edited by jsceash; 11-15-2016 at 03:49 AM.
|
Threaded Mode
