The all-new Comfort Top :)

[PaulDash]

Shehadehd, thanks for your reply. Are you shipping to Europe as well?

[Shehadehd]

Originally Posted by PaulDash

Shehadehd, thanks for your reply. Are you shipping to Europe as well?

So long as there isn't some sanction against where it needs to go, I'll ship it.

[epapp]

So you wont ship if I live in Syria?

[Shehadehd]

Just pushing to the top the price since it's kinda buried within the thread now.

For domestic shipping (US). The unit alone is $200... But if you have a 00-04 and chose to return your original relay, I'll refund $50 from the purchase price.

Thanks again for all you'd support!

[MK_Hatter]

Mine has arrived, fitted in 1 minute and works fantastic! I cannot thank you enough Shehadehd, now my 1998 has better roof controls than my 2014!!!

[Pdwight]

Does mine close the top and windows with the key ?? I have never tried that

[Shehadehd]

Originally Posted by Pdwight

Does mine close the top and windows with the key ?? I have never tried that

No, I removed that from all the modules. After thinking about it for a while, It was a bit more risky than I would have liked. You can only roll up the windows with the key.

[epapp]

You should implement autotop overclock mode.

If you drive over 20mph while the top is closing or opening it semi-safely overvolts the motor to the nearest position, open or closed.

genius

[Pdwight]

Right now it will stop with the car exceeds 23 mph

I wish you could hit the lock button perhaps 2 or 3 times and have it close the top and roll up the windows...and of course lock the car

[Shehadehd]

Originally Posted by Pdwight

Right now it will stop with the car exceeds 23 mph

I wish you could hit the lock button perhaps 2 or 3 times and have it close the top and roll up the windows...and of course lock the car

Yeah, I expected that. The speed limit was used in after researching what other cars do and what is practical for ours. The 987 series operates until 30mph but has vibration sensors that can stop the top if there's too much bouncing around. As a result, I dropped the speed limit target to 25mph but to give myself some margin, I aimed for 20mph as the cut off. The speed the top sees is a result of the wheel speed sensor and there is some dependencies on that, such as wheel size.

Since there are no vibration sensors on our tops, the Comfort-Top also uses acceleration to stop top operation, even if you are under the top speed limit. I'll look to see how many mi/hr^2 it is set to. Keep in mind, it's meant to be a fail safe so I don't recommend you accelerate or decelerate hard to test it.

[Pdwight]

I did mine in a parking lot where it was smooth and straight and no chance of other cars. I say 23 to 24...hard to say but I am very pleased with this (your) product.

Nothing to do but plug it in and calibrate.

Thanks
Dwight Pilkilton

[Shehadehd]

I think I've replied to everyone from the last wave of interests. Ff I missed you, let me know; I have 20 more relays so if you are interested, just shoot me a message. As always, glad those of you who have the retrofit are pleased and let me know if you have any questions.

[Jamesp]

Shehadehd, Just installed my new relay. Took no time at all following your excellent instructions. What a luxury! Thanks for making these available.

[jpc763]

Shehadehd, are you still making these? I am interested.

[CHRISP357]

I would like one too. I can send my relay in first if needed.

[EZY]

I would also be interested in purchasing one of your Confort Top Modules for my 2002 Boxster S... Please contact me.

[Luckyed]

Best (and easiest) mod I have ever done.
You may not be able to see it.....and it might not make the car go faster, but it is a great modification.

[dijinn]

I've been trying to get ahold of Shehadehd since last year. He doesn't seem to be replying back so, no luck getting one of these units...

[Shehadehd]

Hey everyone!! I apologize to everyone who's been trying to reach me the last couple weeks. I've been slammed with work and frankly, haven't even been on the site this year .

To everyone who's interested in a relay, yes I am still making them, BUT... I only have enough parts on hand to make half a dozen or so more. I'm going to go ahead and order more parts but for the next week I'll only be able to ship a limited amount.

I'll comb through emails, messages, and forum posts and get in contact with those of you in a chronological order. Expect an email in the next day or two with more info.

And of course, I can't tell you how happy I am to hear that you guys are still using and enjoying these relays. Thank you all for your ongoing support!!! I can't wait to get more of these out there for everyone to use

[CHRISP357]

Originally Posted by Shehadehd

Hey everyone!! I apologize to everyone who's been trying to reach me the last couple weeks. I've been slammed with work and frankly, haven't even been on the site this year .

To everyone who's interested in a relay, yes I am still making them, BUT... I only have enough parts on hand to make half a dozen or so more. I'm going to go ahead and order more parts but for the next week I'll only be able to ship a limited amount.

I'll comb through emails, messages, and forum posts and get in contact with those of you in a chronological order. Expect an email in the next day or two with more info.

And of course, I can't tell you how happy I am to hear that you guys are still using and enjoying these relays. Thank you all for your ongoing support!!! I can't wait to get more of these out there for everyone to use

Well, like I said, my car is hibernating for the winter so I can send you my relay in advance if that helps.