Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 12-16-2012, 06:04 PM   #1
Registered User
 
Join Date: Apr 2011
Location: California
Posts: 236
Need Help with a Part Number

Hi Guys

I've searched through the parts diagram listing online and I cannot for the life of me locate the part number for this part.

The car is a 2002 986.

Its a rubber plug that is underneath the rear deck lid. There are 2 of them per car (1 per side) and they fit in the groove just in front of the deck lid seal on the body of the car. As you can see from the photos, I'm missing one as this was the hole where the 3rd brake light wiring harness went through for my Aero Kit II wing. Now that the wing is off the car, I'll need to plug it up again.




If anyone has any idea what the part number is for these, I'd greatly appreciate it.

Cheers!

Mark

PS - If anyone is interested in a factory aero kit II wing with 3rd brake light, wiring harness, instructions, and spacers, please drop me a line.


Last edited by Appleguy; 12-16-2012 at 06:09 PM.
Appleguy is offline   Reply With Quote
Old 12-16-2012, 06:40 PM   #2
1999 base
 
Meir's Avatar
 
Join Date: Dec 2011
Location: Coral Springs FL
Posts: 1,596
Garage
i think what you are looking for is part 12 in this diagram.
Porsche Boxster Rear End Single Parts Parts
you can confirm that by measuring the plug.
also try and look for the part number on the one that you still have.
Meir is offline   Reply With Quote
Old 12-16-2012, 06:56 PM   #3
Registered User
 
Join Date: Apr 2011
Location: California
Posts: 236
Thanks for your response...i do appreciate it.

Unfortunately the one I still have doesn't have a part number to it. The plug is definitely not #12 as its much smaller than 100mm.

Cheers

Mark
Appleguy is offline   Reply With Quote
Old 12-16-2012, 08:11 PM   #4
Registered User
 
Steve Tinker's Avatar
 
Join Date: Dec 2008
Location: Queensland, Australia
Posts: 1,522
If you take your rubber grommet into an electrical wholesalers, they should be able to supply you with a similar electrical rubber conduit grommet plug which should just pop in.
I replaced a few of mine on my MX-5 Miata project a few years ago.
__________________
2001 Boxster S (triple black). Sleeping easier with LN Engineering/Flat 6 IMS upgrade, low temp thermostat & underspeed pulley.
2001 MV Agusta F4.
Steve Tinker is offline   Reply With Quote
Old 12-18-2012, 08:04 PM   #5
Kiritsugu
 
Kiritsugu's Avatar
 
Join Date: Jun 2012
Location: MD, USA
Posts: 31
Garage
I couldn't find it after a quick skim, but this seems to be pretty comprehensive. Try around page 220.

https://docs.google.com/open?id=0B8u6rq00lb8gSUpvZ2ZGSE95aW8

__________________
"Drive it like you stole it..."
Kiritsugu is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 11:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page