05-07-2015, 09:03 PM
|
#1721
|
Registered User
Join Date: May 2015
Location: Greater Seattle, WA
Posts: 534
|
Not today, but earlier this week, I applied some Aquapel on my 986. (In the Pacific Northwest, this kind of thing can be important.)
That stuff takes a lot of buffing and paper towels to get off! Did take a bit longer than expected to apply.
It even rained some later that day, and the 'pel worked awesomely. At low speed small droplets would accumulate and when I used the wipers, they would literally hurdle that water off the side of the glass. Above about 40 mph the droplets would move off the glass with no wipers needed.
New wipers (Bosch set specially made for the 986 with curved passenger wiper) working very well also.
|
|
|
05-07-2015, 11:27 PM
|
#1722
|
Registered User
Join Date: Apr 2015
Location: SC
Posts: 33
|
I decided to get the NT555's from http://4wheelonline.com/NittoTires.19627 because of the price. I know some guys didn't like them but I have good experience with them. May not be the best tires out there but reliable enough for regular street driving.
|
|
|
05-08-2015, 12:00 PM
|
#1723
|
Registered User
Join Date: Mar 2013
Location: Florida
Posts: 1
|
I'm keeping this Boxster
I've done several things recently to my 2005 Boxster S.
1. Removed factory radio/display and installed Kenwood DNX-892 with XM receiver. I bought the entire system from a company in California so I could retain the factory Bose amp. It wasn’t cheap ($2200) but I now have Garmin Nav with voice prompts, XM radio, HD radio, Bluetooth audio, Pandora and other apps, 7” touch screen, hands-free phone, iPhone mirroring, etc. Fantastic! I have had the radio area apart in the past to install a Dension BT unit (it sucked) and to replace the strut in the glove box so the disassembly wasn’t new to me. The system included a NavTV unit to interface with the MOST. Installation was not simple but everything fit behind the new radio and the technical support was excellent.
2. Removed and re-painted my climate control temp and blower buttons. I used the wrong solvent to remove the rubberized paint (what was left after 10 years) and sort of partially melted the grooves in one of the buttons. The repaint looks very good but it bothered me enough that I just bought a used climate control unit on eBay for $90 and I will cannibalize the buttons, repaint them, and it will go better this time. I’ll use paint thinner this time (as recommended) instead of Goof-Off. There is a company that refurbishes the buttons ( Sticky No More - Exotic Cars Interior Refinishing Services) and as it turns out, financially, that would have been the way to go but I didn’t know I was going to damage my buttons and I’m stubborn and like to do these things myself.
3. Next project: replace the broken “Oddments” storage cover in my driver’s door. The hinge is broken so I negotiated with an eBay seller into removing the cover and hinge from a Sand Beige door panel they were selling and I paid for just that.
4. I’m currently looking for a used left Alumalook thumb button for my steering wheel. I WILL NOT give $160 to Porsche for a new OEM plastic replacement. If I don’t find a reasonably priced used part, I guess I will re-paint mine in black.
|
|
|
05-08-2015, 02:18 PM
|
#1724
|
Registered User
Join Date: Oct 2013
Location: San Jose, CA
Posts: 583
|
Installed my new steering wheel!
Before:
After:
__________________
2000 S - Borla Exhaust, TS Cat Deletes, RSS UDP, B&M Short Shift, T96 Steering Wheel, Potenza RE-71R's,
Mantis 2.0L Deep Sump, de-snorkeled, Bilstein PSS9 Coil-Overs, Rennline lug studs, and auto crossed regularly.
|
|
|
05-09-2015, 04:33 PM
|
#1725
|
Registered User
Join Date: Apr 2012
Location: ohio
Posts: 86
|
Drove the Emerald Necklace around Cleveland Ohio
We drove the entire Emerald Necklace of metropark roads around Cleveland Ohio. It took us about 9-1/2 hours (152 miles) with lunch, dinner and a couple stops for garage sales to go from the tip of the Rocky River Reservation to the end of the parks just past Squires Castle in the North Chagrin Reservation. It was a beautiful day for it. Only saw 4 other Porsches.
2000 base
|
|
|
05-09-2015, 05:40 PM
|
#1726
|
Rennzenn
Join Date: Feb 2005
Location: Virginia
Posts: 1,369
|
Took fastest time of the day at Shenandoah region PCA's first autocross of the season!
__________________
Rennzenn
Jfro@rennzenn.com
|
|
|
05-09-2015, 06:17 PM
|
#1727
|
Need For Speed
Join Date: Feb 2013
Location: Funville
Posts: 2,112
|
Quote:
Originally Posted by j.fro
Took fastest time of the day at Shenandoah region PCA's first autocross of the season!
|
Nicely done you animal!
__________________
2003 Boxster S
| 987 Air Box | K&N Air Filter | 76mm Intake Pipe| 996 76mm TB | 997 Distribution T | Secondary Cat Delete Pipes | Borla Muffler | NHP 200 Cell Exhaust Headers |
|
|
|
05-09-2015, 07:02 PM
|
#1728
|
Registered User
Join Date: Apr 2013
Location: Buffalo NY
Posts: 184
|
Finally did that oil change. My washers from pelican were the wrong size. I was already committed, so I had to reuse the old washer.
The drain plug is suspect after torquing it. I'll definitely need to replace it when I do the fall oil change.
|
|
|
05-10-2015, 06:11 AM
|
#1729
|
Registered User
Join Date: Oct 2012
Location: Cincinnati, Ohio
Posts: 373
|
Replaces the sway bars with Tarrett Bars. Feels great!
|
|
|
05-10-2015, 01:54 PM
|
#1730
|
Registered User
Join Date: Aug 2014
Location: Delaware
Posts: 142
|
Drove 250 miles and snapped a few photos with my 2.3-16 (getting it out of winter storage).
I forget how loud that Cossie exhaust is. Makes the Porsche sound Lexus quiet.
|
|
|
05-10-2015, 05:45 PM
|
#1731
|
Registered User
Join Date: Oct 2014
Location: Santa Rosa, CA
Posts: 520
|
Installed cat delete pipes, failed installing a PSE, put new floor mats, replaced the wind deflector latches.
Next step is the rear speaker kit
__________________
2003 2.7 Boxster - Tiptronic - Carrera wheels - OBC - Red calipers - Cat pipes - Modified muffler - Rear speakers - K&N - Litronics
2006 V6 Mustang
2008 ML 350
|
|
|
05-10-2015, 05:50 PM
|
#1732
|
Registered User
Join Date: Sep 2013
Location: Chandler, AZ
Posts: 1,796
|
Like your 2.3 - 16 bobbeck.
__________________
03 Carrera
02 Boxster S Guards Red, black interior with matching hardtop
89 Carrera 4
89 944 S2
78 911SC
|
|
|
05-11-2015, 02:56 AM
|
#1733
|
Teddyonine
Join Date: Dec 2012
Location: Charleston WV
Posts: 57
|
Got rid of some pollen and rediscovered the shine
|
|
|
05-13-2015, 12:38 PM
|
#1734
|
Toppy
Join Date: Apr 2014
Location: Dorchester, ON, Canada
Posts: 140
|
Replaced the AOS, as I was taking off one wheel why not 2 and replace the plugs as well, tubes were nice and dry, no signs of leaking. Measure the rotors while there, 19.9 mm, still with in spec. Replaced the oil filter after 400 miles, was pleased to find it clean with no alumimum. I found 10 or so flakes when I changed it before hibernation. I will check it agin after anther 800 miles.
__________________
1999 Boxster
Arena Red/Graphite Grey Interior/Black 03 Top/550 All Red Tail Lights
|
|
|
05-14-2015, 11:02 AM
|
#1735
|
Registered User
Join Date: Jul 2014
Location: Valparaiso, IN
Posts: 184
|
Had a business trip to take yesterday and took the Boxster - 450 miles from Valparaiso, Indiana to just outside Madison, Wisconsin and back. Left at 8:30am, had a 3hr. meeting, stopped to have dinner with an old friend in the Chicago suburbs, arrived home at 10pm. 26 miles per gallon.
This was my first drive of any real distance since I've had the 2000 S (almost one year). I was a little apprehensive because of some lower back issues but was comfortable the entire time, just wished I had cruise control.
Great experience
Larry (The Bald Eagle)
|
|
|
05-14-2015, 01:40 PM
|
#1736
|
Registered User
Join Date: Aug 2014
Location: Delaware
Posts: 142
|
Quote:
Originally Posted by Porsche9
Like your 2.3 - 16 bobbeck.
|
Thanks! It's my second favorite ride.
|
|
|
05-14-2015, 04:19 PM
|
#1737
|
Registered User
Join Date: Apr 2015
Location: 23451
Posts: 32
|
Spec Boxster Build.....
Getting the parts list together.......
|
|
|
05-15-2015, 02:26 PM
|
#1738
|
Registered User
Join Date: Feb 2015
Location: Arizona
Posts: 7
|
Today I finally de-snorkled. I should have done that months ago - it only took 5-10 minutes of work. Now I get that "growl" at all RPMs instead of having to wait until I hit 5K rpm.
I also ordered some Carbon Fiber door sill protectors, and a "Porsche" 3rd brakelight decal
|
|
|
05-15-2015, 03:15 PM
|
#1739
|
Registered User
Join Date: Apr 2015
Location: AZ
Posts: 23
|
Changed the transmission fluid...now the steering wheel isn't straight
__________________
03 Boxster S
Seal Grey/BLK/BLK
6 spd, LN IMS Retrofit, 997 style RMS
|
|
|
05-15-2015, 03:25 PM
|
#1740
|
Registered User
Join Date: May 2008
Location: MN
Posts: 327
|
I just finished installing the 4th stalk for OBC control using a switch from a 4 stalk assembly I bought on Ebay and the wiring from Dwight. Everything went smoothly and is working great!
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 05:52 AM.
| |