Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 12-22-2011, 02:28 AM   #1
Registered User
 
tonycarreon's Avatar
 
Join Date: May 2009
Location: Frederick, MD
Posts: 1,396
i think i remember a thread like this awhile back.

i have a similar problem. FOB 1 works fine. FOB 2 only unlocks the frunk and starts the car. will not lock/unlock the doors or the rear trunk. i believe someone said the problem is probably the internals, not battery (i replaced the battery and even switch key batteries with no change.)
__________________
"Speed has never killed anyone, suddenly becoming stationary... that's what gets you."
tonycarreon is offline   Reply With Quote
Old 12-22-2011, 06:00 AM   #2
1999 base
 
Meir's Avatar
 
Join Date: Dec 2011
Location: Coral Springs FL
Posts: 1,617
Garage
Dose the buttons look OK?

When I first bought my car, both of the remote gave me problems, one was not working at all.
I removed the cover and notice that the buttons are “melting”.
Browsed the internet a little bit, found similar buttons and ordered them.
For my luck they were a perfect fit.
I replaced all 6 buttons on the two remotes. One is working like a brand new.
The other works as well (the LED turns on when I press), but it dosent do anything in the car (and the LED lights up different).
I think it needs reprogramming, but I’m not sure if I can do that without having the barcode of the remote.

Any way, this is the part you need.




this is how it looks after I fixed it.

Meir is offline   Reply With Quote
Old 12-22-2011, 06:59 AM   #3
Registered User
 
Join Date: Dec 2009
Location: USA
Posts: 262
Quote:
Originally Posted by Meir View Post
When I first bought my car, both of the remote gave me problems, one was not working at all.
I removed the cover and notice that the buttons are “melting”.
Browsed the internet a little bit, found similar buttons and ordered them.
For my luck they were a perfect fit.
I replaced all 6 buttons on the two remotes. One is working like a brand new.
The other works as well (the LED turns on when I press), but it dosent do anything in the car (and the LED lights up different).
I think it needs reprogramming, but I’m not sure if I can do that without having the barcode of the remote.

Any way, this is the part you need.
Thank you for the info Meir.
My buttons look clean.

May I ask some questions?
1. Did the LEDs used to lit up BEFORE you replaced the buttons?
2. The FOB that wasn't working at all, is that the FOB still not working? Just want to confirm.
3. You said, "the LED lights up different." Do you mean that the LED lights up different in comparison to the same button from working FOB? Or, compare to the different buttons on same FOB?
4. Must the electronic part, the part shown in your second picture below, be inside the FOB housing for the buttons to work? Or, can it be removed from the FOB housing and still work?

Thank you,
mikehkang is offline   Reply With Quote
Old 12-22-2011, 07:02 AM   #4
Registered User
 
jcb986's Avatar
 
Join Date: Apr 2009
Location: Orlando
Posts: 1,266
If you had a 2 button remote, you need to stay with a 2 button. This is want I was told by the Porsche Dealer.
__________________
http://i768.photobucket.com/albums/x...6/PC120055.jpg

Old Hippie Young Heart
2000 S/3.2 Liter/Tiptronic/Boxster S Sport Package/Cruise Control/Slate Grey Metallic
Red Special Leather Interior/Red Floor Mats/Red Hand Painted Instrument Dials/Roll Bar/Windstop
Small Carbon Package/Leather Wrap Carbon Wheel/Center Console Exterior Color/Alum Carbon Shift Knob
AM/FM Radio w/CD Player & Changer/Digital Sound Package/18" Turbo Wheels/Wheel Caps w/Colored Crest
jcb986 is offline   Reply With Quote
Old 12-25-2011, 07:50 PM   #5
1999 base
 
Meir's Avatar
 
Join Date: Dec 2011
Location: Coral Springs FL
Posts: 1,617
Garage
[QUOTE=Meir;270029]When I first bought my car, both of the remote gave me problems, one was not working at all.
I removed the cover and notice that the buttons are “melting”.
Browsed the internet a little bit, found similar buttons and ordered them.
For my luck they were a perfect fit.
I replaced all 6 buttons on the two remotes. One is working like a brand new.
The other works as well (the LED turns on when I press), but it dosent do anything in the car (and the LED lights up different).
I think it needs reprogramming, but I’m not sure if I can do that without having the barcode of the remote.


Yes, thats what I tought.
At the moment I don't have a problem with that.
I'm the only driver on the car and the spare key works fine except the fob part.
I will fix it one day, but it's on the bottom of my "to do list" at the moment.
Meir is offline   Reply With Quote
Old 12-22-2011, 06:38 AM   #6
Registered User
 
Join Date: Dec 2009
Location: USA
Posts: 262
Quote:
Originally Posted by tonycarreon View Post
i think i remember a thread like this awhile back.

i have a similar problem. FOB 1 works fine. FOB 2 only unlocks the frunk and starts the car. will not lock/unlock the doors or the rear trunk. i believe someone said the problem is probably the internals, not battery (i replaced the battery and even switch key batteries with no change.)
Thank you for the reply Tony.
It sounds like a few buttons are gone.
mikehkang is offline   Reply With Quote
Old 12-22-2011, 07:51 AM   #7
1999 base
 
Meir's Avatar
 
Join Date: Dec 2011
Location: Coral Springs FL
Posts: 1,617
Garage
1. Did the LEDs used to lit up BEFORE you replaced the buttons?
- Some times yes and some time no. If the LED is on, the remote must work.
So if you press the button and the LED is flashing fast but nothing happens it is not the button.

2. The FOB that wasn't working at all, is that the FOB still not working? Just want to confirm.
-yes it is steel not working. After fixing the buttons, I researched about how to program it to the alarm. The only way to do it is at the dealership with the barcode of the fob, and I don’t have it.
(Coming to think of it, I did it a year ago when I was still a rooky and wasn’t aware of the forums. maybe I will post it and see if someone can help. I also have the Durametric tool now, so maybe I can use it to program the fob. Mm…)

3. You said, "the LED lights up different." Do you mean that the LED lights up different in comparison to the same button from working FOB? Or, compare to the different buttons on same FOB?
- The non working fob will flash in a sequence of two flashes when i press and hold any button on it.
The working fob will flash fast at all time when any button is pressed.
This is why I think it needs to be reprogrammed.

4. Must the electronic part, the part shown in your second picture below, be inside the FOB housing for the buttons to work? Or, can it be removed from the FOB housing and still work?
- No. you can still use it when it is outside the plastic housing.
In fact, when I replaced the buttons I pressed them couple of times in front of the car, just to make sure it works before I put it back in the housing.
Meir is offline   Reply With Quote
Old 12-22-2011, 08:58 AM   #8
Registered User
 
Join Date: Dec 2009
Location: USA
Posts: 262
Quote:
Originally Posted by Meir View Post
2. The FOB that wasn't working at all, is that the FOB still not working? Just want to confirm.
-yes it is steel not working. After fixing the buttons, I researched about how to program it to the alarm. The only way to do it is at the dealership with the barcode of the fob, and I don’t have it.
(Coming to think of it, I did it a year ago when I was still a rooky and wasn’t aware of the forums. maybe I will post it and see if someone can help. I also have the Durametric tool now, so maybe I can use it to program the fob. Mm…)

3. You said, "the LED lights up different." Do you mean that the LED lights up different in comparison to the same button from working FOB? Or, compare to the different buttons on same FOB?
- The non working fob will flash in a sequence of two flashes when i press and hold any button on it.
The working fob will flash fast at all time when any button is pressed.
This is why I think it needs to be reprogrammed.

4. Must the electronic part, the part shown in your second picture below, be inside the FOB housing for the buttons to work? Or, can it be removed from the FOB housing and still work?
- No. you can still use it when it is outside the plastic housing.
In fact, when I replaced the buttons I pressed them couple of times in front of the car, just to make sure it works before I put it back in the housing.
Thank you for the prompt reply.

My situation is that all three buttons light up the LED. However, each button lights up its own unique sequence of Morse code like pattern.

Please let me know if Durametric tool will reprogram the fob for you. Perhaps it is time for me to rent/buy one.

Thank you again.

Last edited by mikehkang; 12-22-2011 at 11:54 AM. Reason: sp
mikehkang is offline   Reply With Quote
Old 12-22-2011, 09:00 AM   #9
Registered User
 
Join Date: Dec 2009
Location: USA
Posts: 262
Could the faulty ignition switch cause my FOB problem?
Anyone?
mikehkang is offline   Reply With Quote
Old 12-22-2011, 09:36 AM   #10
1999 base
 
Meir's Avatar
 
Join Date: Dec 2011
Location: Coral Springs FL
Posts: 1,617
Garage
Quote:
Originally Posted by mikehkang View Post
Thank you for the promt reply.

My situation is that all three buttons light up the LED. However, each button lights up its own unique sequence of Morse code like pattern.

Please let me know if Durametric tool will reprogram the fob for you. Perhaps it is time for me to rent/buy one.

Thank you again.
I will try it this weekend.
I will also look again at my non working remote and see if I also have the “Morse code”
I will post results next week.
Meir is offline   Reply With Quote
Post Reply

Tags
fob , remote



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 10:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page