Do you have a carbon fiber 6spd shift knob?
 

Black leather center console armrest with hinge/pin and screws?
ashtray delete?
Unused Cigarette lighter with heating socket?

Thanks!
Mitchell

How much for a roll bar shipeped to 45140?

I'm looking for a center wind screen for a 2000 Boxster S and I am also in need of a convertable roof retainer strip that snaps onto to the rear edge of the front roof support tray. It has a spline on the top that the roof attaches too and a spline on the bottom back edge that the head liner attaches to. Mine is split at the roof spline.

$200 and 90% of that is shipping and handling. I think someone on here was parting out a boxster up there in Ohio recently.
I have center wind screen's for $50+shipping. Sorry but I don't have any tops with headliners.

Mr Wood, seeing that Ive been stalking your build thread I noticed you swapped out your muffler LOL

Wanna sell me the hot dog muffler now? LOL!!!!!!!!!!!

Woody - looking for the manual seat adjustment lever for the driver side seat and wind deflector to fit 2001 base?
thx!
~Alura

They should still have the retainer strip for the roof canvas. Unless they never had a roof liner from factory. I am interested in the windscreen regardless. I will take a picture of the retainer strip as it does not show up in the parts fish.

https://photos.smugmug.com/Other/She...iner%202-L.jpg

Should look like this if not broken.

https://photos.smugmug.com/Other/She...retainer-L.jpg

Do you have the connector/wiring harness for the MAF still? How much shipped out to 98036?

I usually sell the engine harness with the engine. I think I have one but will need to check..$20 shipped is my minimum.

Picked this up yesterday. 2001 base with a tiptronic and 180K. It's pretty worn out and doesn't have anything special about it except the 550 taillights. $150+shipping.
http://i765.photobucket.com/albums/x...psndjrcpao.jpg
http://i765.photobucket.com/albums/x...ps7fhc2ve8.jpg
http://i765.photobucket.com/albums/x...pszshl68mn.jpg
http://i765.photobucket.com/albums/x...ps4u9y2qjm.jpg

I'm looking for a black or beige shifter boot and 5 speed knob. 2000 base. thanks

Need - Black non-lighted sun visors and black shifter boot.
 

Woody,
Looking for drivers and passenger side non-lighted sunvisors for a 1999 Boxster. Also if you have a black shifter boot I was looking for that as well. Let me know how much shipped to 28173 (Charlotte NC area).

Thanks!

Tail lights
 

Woody I will take the tail lights if they are not spoken for. Shipping to 46060, send you a pm.

Sorry guys but the only good shifter knob/boot I have is grey. I have lots of sunvisors but they're all missing the mirror cover. Is that why you need both?
Sale pending on the taillights.

It's funny you ask about why I need the sun visors.....yes mine are missing the flip up covers. Is that a typically lost item?

Yes. I get asked once a day for sunvisors and wind deflectors behind the seats. Suncoast Porsche Parts & Accessories Sun Visor Mirror - Euro, No Lights
The visor with lights is more expensive.

Hey Woody - looking for 2 front hood shocks pn# 996-511-551-01


Sent from my iPhone using Tapatalk

Thank you!

PM Sent to you Woody
 

Woody...sent you a PM with a suspension question.

On another note...do you have wheel well liners for a 1999 Boxster? Lets say all 4.

http://i765.photobucket.com/albums/x...psse6iclm4.jpg
This is what a non-headliner top looks like. I even checked a 996 top, and it doesn't have that type of retainer

I have a few left front wheel liners. $25 for a not so good one and $50 for a good one. I don't have any right front liners in any condition worth installing. There isn't really a "liner" for the rear. There are two pieces that are attached in that area that could be considered a liner I guess. One is in front of the wheel and I'm not sure what it's real purpose is. The rear piece behind the wheel has a heat shield and is used for attaching the bumper cover.

Hi, looking for a cupholder if you happen to have one.

Thanks!

I think rockauto has them new for $15 each.
I have the early style cup holder for $50+shipping. I can send you a picture if you text me at 512-925-9171


FYI, I'll be closed 6/4-6/15. Going back home to do some king salmon fishing on the Deshka.

I'm upgrading my base to S specs and about the last thing left to do is to change out the coolant tubes to the larger S tubes. Mine is a tip with the 3rd radiator. I stole a pic from another of your threads

http://i765.photobucket.com/albums/x...ps32b4e79a.jpg

I live in the DFW area and can drive down to pick them up if you have them. Let me know a price and if you have a really nice set available.

Thanks,

Jeff

Hi Jeff,
I have a set for $150. It's the main tubes with all the mounting bracket and the second set of larger aluminum tubes behind the radiators.
Thanks Woody

Woody,

Sounds good. I'll take them. Can't make it this weekend, and I know you'll be on vacation till after the 15th. I'll touch base with you after you get back to schedule a trip down to pick them up. Unless you're heading north anytime soon......:-)

I can send funds now to hold them, or bring cash when I come to get them. Your choice.

Thanks,

Jeff

Make sure to start a new fishing thread when you get back!

Lol. Now I have the pressure to catch one. My dad said they're starting to catch some already. I can't wait!

Woody - sorry, never mind. I think I'm just going to have to go with new parts.

I'm looking for a set of cats for my 1998 base. Do you have a set?

I have a set with 65k for $100 plus shipping

They do but the OEM are $30 each! Guess I could go with the non-oem for this non critical part.

Sent from my SM-G935T using Tapatalk

Other guys have had good luck with them.

I am looking for one part that evidently can only be had new if you pay stupid money to ship from Germany. :barf:

The part:

OEM-99635517610
Genuine Porsche Part: AS BRAKE LINE

This is the hard brake line that runs across the front of the car from the distribution block on the front driver's side to the front passenger brake caliper. Mine was damaged during removal.

I know you are away on vacation, but even if I want new parts this would take probably 6 weeks to arrive so you would still beat their availability. Thanks!

I need cup holders and a driver-side floor mat for an '01 986, if you have it.

Woody, do you have a working headlight switch?

Hi Woody. Hope fishing was awesome. Looking for a little bitty pink plastic torx screw retaining nut. I was replacing my headlight switch, and when I pulled the side vent portion of the dash off to gain access, one of these little pink clips launched itself into the dash somewhere. Cannot find it, so would like to see if you could send me a couple of them. In the photo below, the red arrow points at one of them. There are three that hold this section of the dash -- two on the side by the door, and the one in the photo in the switch bezzle. the T15 Torx screws screw into them. They have a clip that slides over the hole in the metal portion of the dash framework. Thanks!

http://986forum.com/forums/uploads02/Pic31465831571.jpg

Fasteners that hold convertible top transmissions?
 

986 561 789 02 Upgrading '98 to newer trans and need fasteners.

https://images-na.ssl-images-amazon....1yk5yM1kwL.jpghttp://986forum.com/forums/uploads02...1465841377.jpg

Looking for 1 or 2 of those little clips myself...if you have any other after you take care of Need_ let me know please. Thanks!!

Good Evening Woody,

Looking for a big handful of all types front and rear trunk carpet fasteners. Can you help?

Hi Guys, Sorry for the delayed answer but I've been fishing and hiking around Alaska for the last week and have been almost completely off the grid the whole time. It's always best to text/call me at 512-925-9171 I'll have to see how hard it is to take off and how big it is for shipping before I can quote a price. I know I have one but can't remember that particular line right now. I'll be pulling orders tomorrow and I'll let you know
I have a cupholder for $50+shipping but only a left floor mat in blue for $20
$60 shipped



I have all those pieces but I have a set minimum of $20 shipped for anything. I'd give those items to you for free if you were at my shop or buying something else. It takes time to go pull those things, package them and then bring them to the post office. I hope you guys can understand

I have all those pieces but I have a set minimum of $20 shipped for anything. I'd give those items to you for free if you were at my shop or buying something else. It takes time to go pull those things, package them and then bring them to the post office. I hope you guys can understand[/QUOTE]

Woody, 20 bucks is more than fair. If the dealer had the part, it would probably be double that! No rush on this. Glad you had a great time up north.

I'll pm you with my info.