986 Forum - The Community for Porsche Boxster & Cayman Owners

Page 23 of 36

Show 40 post(s) from this thread on one page

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)

- Boxster and Cayman Parts for Sale or Wanted (http://986forum.com/forums/boxster-cayman-parts-sale-wanted/)

- - Parting out a whole lot of Boxsters (http://986forum.com/forums/boxster-cayman-parts-sale-wanted/52469-parting-out-whole-lot-boxsters.html)

chromecarz00

06-20-2016 04:17 PM

Hello, do you have a clock spring?

Also, the clear-bottom headlights with the amber reflector from the newer boxsters?

Convertible top?

Any wheels?

Radar

06-21-2016 03:22 PM

I'm looking for the bezel to mount the climate controls up above the radio. Happen to have one?

GTsilber

06-23-2016 04:43 PM

Looking for the plastic weather strip that goes around the driver side headlight...

Sent from my SM-G935T using Tapatalk

itsnotanova

06-23-2016 08:21 PM

Quote:

Originally Posted by GTsilber (Post 500720)

Looking for the plastic weather strip that goes around the driver side headlight...

Sent from my SM-G935T using Tapatalk

Only chance you have of finding one of those is off a boxster that doesn't see much daylight. Down here in Texas, that rubber piece is either broken off or turns into a tar like substance. Nobody sells them new either:( I took them off mine and it really isn't that noticeable.

particlewave

06-23-2016 11:00 PM

Quote:

Originally Posted by itsnotanova (Post 500743)

Frost King double D self adhesive foam rubber. Cut the arch portion off of one of the "D"s to make it a "p" strip. Works decent ;)

This picture is deceptive...the two "D" strips are actually connected (you have to tear or cut them to seperate). Just don't seperate them and cut the arch off one of the strips so you have more surface area for adhesion and place it so that the remaining "D" is at the rim of the headlight.

http://i875.photobucket.com/albums/a...2E95FCAF3F.jpg

davedeck

06-24-2016 09:31 AM

Do you have the brackets that hold the wind guard between the roll bars and possibly the mesh plates that fit inside of roll bar arch?

soxfan1966

06-24-2016 01:54 PM

Side intake / exhaust vents for 2004 S.

In a separate post, someone painted their side vents a contrasting color (seal gray). I was thinking of messing around with a few different colors to see how they look without messing mine up.

Would you have a set for sale?

cornontherob

06-24-2016 07:24 PM

anyone have an arctic silver hood?

itsnotanova

06-25-2016 01:45 PM

Quote:

Originally Posted by davedeck (Post 500797)

Do you have the brackets that hold the wind guard between the roll bars and possibly the mesh plates that fit inside of roll bar arch?

You want to buy those brackets new. I think pelican or ecs sells them for $25-40. I don't have any mesh air diffusors right now. They are $150 each! You want to buy those used if you can find them

Quote:

Originally Posted by soxfan1966 (Post 500818)

I have a 2003 seal grey set for $85 shipped

Quote:

Originally Posted by cornontherob (Post 500852)

anyone have an arctic silver hood?

Sorry I don't have any arctic silver hoods and I don't ship large body parts

soxfan1966

06-25-2016 03:27 PM

Quote:

Originally Posted by itsnotanova (Post 500948)

I have a 2003 seal grey set for $85 shipped

A tad more than I was hoping to sped to just try it out. Let me think about it.

Disaster

06-28-2016 10:36 AM

Quote:

Originally Posted by itsnotanova (Post 499795)

Hi Guys, Sorry for the delayed answer but I've been fishing and hiking around Alaska for the last week and have been almost completely off the grid the whole time. It's always best to text/call me at 512-925-9171
I'll have to see how hard it is to take off and how big it is for shipping before I can quote a price. I know I have one but can't remember that particular line right now. I'll be pulling orders tomorrow and I'll let you know

I have all those pieces but I have a set minimum of $20 shipped for anything. I'd give those items to you for free if you were at my shop or buying something else. It takes time to go pull those things, package them and then bring them to the post office. I hope you guys can understand

Texted you. I'm in for minimum fee for convertible top fasteners.

itsnotanova

06-29-2016 04:22 AM

Parts sent. Texting is always the best way to get a hold of me. Followed by calling. 512-925-9171

Fuzzuki

07-02-2016 04:48 PM

Looking for 2000 base model wind buffer.

and headlights

kefboy

07-05-2016 05:39 AM

o2 sensors available?

jeeper31

07-13-2016 05:27 AM

Looking for the passenger side mesh wind screen. I put my finger through mine last night.... Don't ask. lol

itsnotanova

07-13-2016 09:54 AM

Quote:

Originally Posted by jeeper31 (Post 502853)

Looking for the passenger side mesh wind screen. I put my finger through mine last night.... Don't ask. lol

Sorry I don't. I just got a car that had both of them still attached. I went to take them out and they crumbled into a million pieces.

Nmbrsix

07-14-2016 08:42 AM

Woody, would you have a passenger side dash airbag cover for a black 2002MY dash?

Gasrider17

07-16-2016 05:27 PM

Quote:

Originally Posted by Gasrider17 (Post 497233)

They should still have the retainer strip for the roof canvas. Unless they never had a roof liner from factory. I am interested in the windscreen regardless. I will take a picture of the retainer strip as it does not show up in the parts fish.

I'm still interested in the wind screen for a 2000 Boxster S. Also looking for a engine wire harness for a 2.5 manual. Let me know if you still have the wind screen and if you have the harness?

itsnotanova

07-19-2016 04:42 AM

Quote:

Originally Posted by Gasrider17 (Post 503294)

I'm still interested in the wind screen for a 2000 Boxster S. Also looking for a engine wire harness for a 2.5 manual. Let me know if you still have the wind screen and if you have the harness?

I have a few center wind screens for $50 each and a few auto 2.5 engine harnesses for $100 each.

paulofto

07-20-2016 12:23 PM

2003-2004 Black or Grey Convertible top

Hey Woody, any chance you have a decent one of these. Mine has a tear and can't be repaired so new or decent used is my only hope.

Thanks

rockstar68

07-22-2016 05:25 PM

would you have a complete radio with any brackets, wiring and codes to make it work?

itsnotanova

07-22-2016 08:53 PM

Quote:

Originally Posted by paulofto (Post 503753)

Hey Woody, any chance you have a decent one of these. Mine has a tear and can't be repaired so new or decent used is my only hope.

Thanks

Sorry I don't

Quote:

Originally Posted by rockstar68 (Post 504164)

would you have a complete radio with any brackets, wiring and codes to make it work?

I have one radio with a code and I think it was a cdr-210 out of a 98. I'm not at my shop, but if you text me at 512-925-9171 I can send you some pics. Thanks Woody

kjc2050

07-23-2016 02:40 AM

Woody, Still looking for an '03-'04 top & frame in VG to excellent condition. Thx.

alm001

07-26-2016 05:27 AM

Can you PM me a price for a 4 stalk column assembly? My blinker mechanism has failed.
Shipping to 06074

Chuck W.

07-26-2016 07:24 AM

Quote:

Originally Posted by alm001 (Post 504521)

Can you PM me a price for a 4 stalk column assembly? My blinker mechanism has failed.
Shipping to 06074

When the turn signals fail is it the stalk switch or could it be the clockspring?

itsnotanova

07-26-2016 10:45 AM

Sorry I just sold my last 4 stalk a few days ago. I do have 3 stalk's for $25 and clock springs for $25 plus shipping.

Chuck W.

07-26-2016 02:03 PM

Quote:

Originally Posted by itsnotanova (Post 504547)

Sorry I just sold my last 4 stalk a few days ago. I do have 3 stalk's for $25 and clock springs for $25 plus shipping.

Great prices.... as usual. You can buy his three stalk and move your OBC stalk to it. I am still in the dark as to which part is causing your issue though.

alm001

07-27-2016 04:30 AM

Quote:

Originally Posted by Chuck W. (Post 504572)

Great prices.... as usual. You can buy his three stalk and move your OBC stalk to it. I am still in the dark as to which part is causing your issue though.

This is a great idea!

I'm fairly certain the stalk mechanism is the issue, as It will go left but not return, and will not go right at all.

Woody: Sending PM now.

WayneD

07-27-2016 03:03 PM

Looking for rt side door latch

Do you have a 986 rt side door latch assembly? Wayne

Lcrivers816

07-29-2016 05:13 AM

Hey brother need just the gas door pocket if you got one from a totaled fender literally just need the little metal pocket under the gas door that's it. I'm attaching it to my fiberglass fender. Shoot me a text or message me here 847 886 4463 thanks!!

ClayJ13

07-29-2016 05:07 PM

Looking for a black center console lid for my 2000 Boxster S

itsnotanova

07-30-2016 01:07 PM

Quote:

Originally Posted by ClayJ13 (Post 504904)

Looking for a black center console lid for my 2000 Boxster S

Do you need the vinyl cover or do you need the whole cover because your hinge broke? If it's the hinge you need, it's best to just buy a repair kit from pelican or ecs

ClayJ13

07-31-2016 05:13 PM

Lid works fine, my car has grey carpet so the lid is also grey. I just think a black lid on the black console would look best.

itsnotanova

08-02-2016 09:29 AM

I love my job! Everything you see is real, even the right hand drive Gt40
http://i765.photobucket.com/albums/x...psy9ekrfem.jpg
http://i765.photobucket.com/albums/x...psmkdqhqpv.jpg
http://i765.photobucket.com/albums/x...pssz053v2m.jpg
http://i765.photobucket.com/albums/x...pswwugyox8.jpg
http://i765.photobucket.com/albums/x...psz2t1osbp.jpg

Chuck W.

08-02-2016 07:26 PM

Quote:

Originally Posted by itsnotanova (Post 505237)

I love my job! Everything you see is real, even the right hand drive Gt40

There is some big money in there!

GTsilber

08-02-2016 08:16 PM

Quote:

Originally Posted by itsnotanova (Post 505237)

Is this someone's personal collection...impressive

Sent from my SM-G935T using Tapatalk

n559br

08-03-2016 02:55 AM

I'm looking for a pax side mesh insert for the rool bar.

jeeper31

08-03-2016 06:02 AM

Looking for a drivers side wheel carrier of 98 boxster.

jeeper31

08-03-2016 07:50 AM

I just want to say that I have never bought anything from Woody but i wish i had. I had a problem and it looked like I was gong to need a part and he was in instant communication with me to help me out. Fortunately for me I didn't need the part but i sorta wish i did. Woody is awesome. Thanks Woody.

78F350

08-03-2016 09:24 AM

Quote:

Originally Posted by itsnotanova (Post 505237)

http://i765.photobucket.com/albums/x...pssz053v2m.jpg
http://i765.photobucket.com/albums/x...pswwugyox8.jpg

That back wall reminds me of the storage case I had for my Matchbox® cars as a kid. Hell, I'd love to just have the toy model for each of those cars - having the real thing would be too much work and worry for me.

All times are GMT -8. The time now is 11:57 AM.

Page 23 of 36

« First

Last »

Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website