WTB 2000 Boxster Wind Deflector Side Panels
 

I need both the driver side and passenger side panels for the roll bar wind deflector. Have any left?

Sorry I don't. Those are one of those parts that are sold almost as soon as they come in at $50 for each side. I have a few middle Plexiglas windscreens though. Also $50. It's best to follow my FB page "Woody's Parts LLC" and grab them as soon as a new boxster comes in.

dash trim
 

Woody,

i am looking for the trim around instrument cluster and around heater controls for a 1999 Boxster. the ones i have are wood grain but would settle for black or what you might have. Mine the wood has lifted and cracked. How much to ship to 03431 Keene NH.

Thank you

John

dash trim
 

Yes not sure how it comes but the trim around the gauges.

thanks

John

Do you have hard top mounting kit, 2 each: spin locks and screws?

Do you have a hard top mounting kit, 2 each: spin locks and screws ?

2003 986 2.7 Engine wanted
 

Do you have a 2.7 engine for a 2003 Boxster available? My IMS bearing decided to go this week with only 60,050 miles on the car.

I do. $30 shipped
I don't right now but I might be getting a 3.2 soon.

Rear spoiler top/cover/lip
 

Hi,

I am looking for rear spoiler top cover or lip (it is referred by various name) for my 2003 Boxster and I was wondering if you would have one.

Thanks,

Jay

Sorry I don't

Originally Posted by franko View Post
Do you have a hard top mounting kit, 2 each: spin locks and screws ?
I have someone else that wanted this if you don't.

hello....do you have any of the longer convertible top transmission standoffs, by chance?

$20 shipped is my minimum for anything. All 6 for $20 shipped.
Thanks Woody

passenger side window regulator?
 

Hi Woody:
Am looking for passenger side window regulator for my 97 boxster...have any 'low mileage' ones?

Also, IF you have front bumper cover in good shape from a silver boxster that would fit mine, I may be interested.

Much obliged,

John

I'm in need of a left and right windshield wiper armatures, black (not blades) in excellent condition for a '99 Boxster.

I need a passenger window regulator, lift support (hinges) for front and back trunks for a 2001 boxster. Thank you

Drivers side cooling Resistor for Auxiliary Fan
 

Do you have one of the Resistor for Auxiliary Fan?
Shipped to 11725.
Thanks,

I sell those with the fan for $40. I'd recommend a generic resistor from Ebay. That's what I saw someone else do on here.

resistor
 

I will take it for 40.
Shoot me a pm with details.
Thanks,

Boxster
 

I need a front bumper cover

Do you have a rear shelf w/gray carpet? If not, black? 99 base. If so, shipping to 32011.

Still looking for a black leather driver seat.

I have one for $50 plus shipping but I wouldn't know shipping until I got it boxed up. If you text me at 512-925-9171 I can send you pics.
Thanks
I almost always sell my seats in pairs but the only pair I have right now are in my box. I wasn't going to sell them until I have a pair of racing seats to replace them. I've been looking for awhile now because I'm too cheap to buy new
At this time I don't have any front bumpers. There's someone out of California that sells new bumpers really cheap. Like $300 to your door cheap. Don't remember who that was though. Google is your friend

I have an 99 in arctic silver, It came with the attachments on the A and B pillars for the porsche RTS (roof transport system). I want to remove them put need the replacement parts. For the A-Pillar its a plastic spacer and the two associated screws. On the B pillar its a snap in cover plate and the factory mounting screws.

I know its a small request, any chance you have those in arctic silver? I haven't checked with the dealer yet.

Thanks

Do you have a dome light for a 2000 base? Thank you

Do you have a dome light for a 2000 base black? thank you

Sorry I don't. The one's that don't break when you look at them wrong, I sell with that whole top latch.

Do you have a cowl for an 02 base? I bought one on eBay, and not only is it broken in the same place as the one it's supposed to replace, it's broken worse.

I don't. They switched to that horrible design in 01 and I can't figure out why. The mounting brackets are always broken on them. 97-00 are never broke.

Looking for 2 sets of complete undertrays. A whole set of at least the main two pieces. I got two boxsters that need them. Hardware would be nice too.

Hi Woody,

I need a passenger side turn signal for a 2000 Boxster. Mine broke while I was taking it out... here is a picture. Shipping would be to 23226

http://ebayapi.loc8apartltd.netdna-c...dVR76M/$_1.JPG

Calipers
 

Sir,

How much for a set of brake calipers? Base model, please

Under tray plastic
 

Hi Woody,

I am looking for the plastic trays that go under the car.

The center rear and the one the runs across the rear section.
Here are the parts numbers (in case you needed them):
996 504 043 02 m100 986-504-119-00-M100

Thanks,

Curious if you happen to have any arctic silver 986 rear trunk lids in clean condition with no fading or scratches and what the charge would be also to los angeles

Hood Trim Cowl
 

I am looking for the trim piece that goes around the top of the frunk, under the wipers. The part number is 9965725630601C and I have a pic of it here. I need the part for a 2001 and newer model.
Thanks!! :cheers:
http://986forum.com/forums/uploads02...1460994421.jpg

Looks like three strikes. Sorry guys.
1)I have only had one boxster ever come in where that last belly pan isn't broke or missing.
2)I'm not set up yet to ship large body parts. I just recently signed a contract to get shipping large items for a reasonable price but I still need to find a source for large cheap boxes.
3)There's a WTB thread not too long ago where people are suggesting where to get the 2001-04 cowl trim. They're almost always broke when I get them. I would love to ask the engineers why they switched designs in 01, because the 97-00 never break.

Hey Woody,

I have an 03S. I need prices on:
1. The black bracket that holds the passenger side intake vent on.
2. a shifter assembly
3. The little black tab that locks the harness in place on the back of the gauge cluster.

Let me know shipping to 95112.

Thanks.

Thanks for checking Woody...I started that thread looking for one, I was trying to avoid spending $150+ for the part, but I guess i might be going that route after all.

Try Sunset Porsche. I just bought this exact piece for $109 and the two vent grill caps (996-572-570-01-01 and 996-572-569-01-01) for $0.71 each. This piece is exposed to the environment and just fades and gets brittle with time so you are better off with the new piece. After replacing the windshield one of the screw holes broke and I could not repair it. At least it will look like new!

Hey woodie, do you have a front auxiliary radiator fan. My front left had the motor go out.


Sent from my iPhone using Tapatalk

I usually have at least one in stock but I've been hit hard on those lately. I also ran into a batch of bad ones. FYI, they're not side specific but you should double check the low and high speed work before you go through the hassle of installing one. It's very easy to do with a battery charger or even jumper cables. I think the black wire is the ground and the white and green are for the slow and fast fan. Slow is usually the one that goes out first and the problem 90% of the time is a burnt out resistor. There's a thread out there where someone replaced just the resistor.