Woody, Happy New Year! I'm wondering if you have the rubber 'smile' that seals the front leading edge of the bonnet. Plastic and rubber may be incorporated. Also need cowl conceal plastic piece.
Thanks!

Sent from my SAMSUNG-SM-G900A using Tapatalk

Woody, do you still have the speaker boxes (4 speaker )? Any of the Bose stuff?

Sent from my SAMSUNG-SM-G900A using Tapatalk

Hi, I don't have any good front leading edge of the bonnet. The rubber parts usually get brittle with age from all the sun we get down here. The cowl conceal plastic piece depends on what year yours is. The 2001-04 mounting tabs are always broke. the 97-00 is $20+shipping. I only have a Bose speaker system from a 2003. Dash and door speakers are $20 each and the rear sub box is $150+shipping.
Thx Woody
http://i765.photobucket.com/albums/x...psxasxql7h.jpg
Factory speakers on the left, Bose on the right

I have 2003, keep me in mind if you get a cowl piece and front smile. Thanks bud. Will pass on Bose...:)

Sent from my SAMSUNG-SM-G900A using Tapatalk

Hey there woody, I got a 2000 S, wondering if you got a black soft top with glass rear window?

WTB 986 suspension pieces
 

Woody,
Do you have any really nice, low mileage suspension pieces for 2001 Boxster s no struts, but I need front and rear lower control arms and rear upper control arms, maybe more

I have an 03 glass window top and frame for $600. Shipping would probably be $200ish to get out there to Washington. Honestly you'll probably find one cheaper up there. The demand for good tops is higher down here because the sun kills the plastic windows.
I don't have any low mile S suspension, but that won't matter for the parts you're looking for. I have a 2000 base with 59k that still has all it suspension pieces. Each suspension piece is $25 each.

Hi Woody,

I need a fuel tank gauge from anything 01' or earlier. PN: 996.620.808.00. Let me know what you have available. thanks.

I sell the pump for $40 and the sender for $40 plus shipping. I think I have a 00 with 59K or 98 with 61K.

Thanks - PM sent. I'll take the sender from the 00' please.

I also need a part of the AC system. Central Valve Electric Motor PN: 996.573.915.00

Circled part on diagram is attached:

If Dubaday is not interested in glass window top - I may take it off your hands.

went ahead and took your advice on it being cheaper here in washington, by a couple benjamins, no shipping, and local pickup!

Thank you,
Randy

SOLD: PM'd woody that i'd take the 03 top last evening, if is was in decent shape(It is).

You can find more online at car-parts.com

Ray

Hey woody buy this car so I can buy the wheels from you :D

https://www.iaai.com/Vehicles/VehicleDetails.aspx?itemID=21014861&RowNumber=17&l oadRecent=True

jb92563 beat you to it. I might be getting another one soon so stay tuned. It's best to follow my facebook page "Woody's Parts LLC" to see when a new car comes in and jump when you see something you want. It's hard for me to keep track of all the people who want me to get back with them if I get a particular part in. Thx
I'll be bidding on it but there might be someone who wants it more than me. If I do get it, you have dibs on the wheels right behind me. :)

OK sounds good Woody. I kinda thought you might want to keep the wheels. But second in line is still good.

Looking for the MAF security torxs. Have any? Any thoughts on how to remove the two I striped?

Just replace them with a couple small Phillips head screws and be done with it. Nothing special about the security torx.

How did you manage to strip them out though?

Previous owner started the striping process, I didn't have much to work with. Off the top of your head, do you know what the replacement size is?

X2
They really are not much different than a drywall screw.

Okay, thanks

Dremel a straight cut on the screw heads so you can use a flat screw driver to remove them. Replace with something else after.

Go slowly with the Dremel so as not to build up too much heat to avoid melting the plastic. Perhaps you can squirt with water as you Dremel the screws to keep them cool.

Anything for a neutral safety switch left?

Hi. I own a '99 996 with the very light grey interior (Graphite Grey?) and need a replacement airbag cover for the three-spoke steering wheel. Super hard to find so far. I'd really appreciate any advice/help. Thank you

I have a gray three spoke steering wheel and airbag for $400. Not going to seperate. If you text me at 512-925-9171, I can take a pic tomorrow.
Thx Woody

If you come Across the 3 covers for the hard top interior. The one for the center clamp and the two for the spin lock

Sent from my SM-G925T using Tapatalk

Do you happen to have a dot matrix display for an 03-04 S?

I don't because I almost always sell the clusters complete for $50-150. Look for a member on here that goes by Qumalas or something like that. I always forget how he spells it. His name is Steve and he's out of Colorado. He can repair some broken clusters. I'm sure someone will chime in on his screen name and or how to get a hold of him.

Woody,

I was actually looking for the the entire cluster. I have a non dot-matrix (OBC activated), and am looking to replace it with a cluster with the dot-matrix screen. I'm looking for an 03 - 04 S model (silver face). Let me know what you have.

Thanks.

Tony

How about a 3 or 4 stalk turn signal assembly?

Tony

I don't have any 4 stalk, but I have lots of non OBC three stalks. $25 plus shipping. I'd guess less than $10 to ship but the USPS just raised their rates.

I'll take one of those 3 stalks. Expect a pm in a minute.

Sent from my SM-T800 using Tapatalk

immobiliser plugs
 

Woody,
Im chasing the two immobiiser plugs the black and the blue one cut as far back to the main harness as possible,
Im in Western Australia so shipping via cheapest means haha
Albany,
Western Australia,
postcode 6330,
cheers Russ...
http://986forum.com/forums/uploads01...1454228185.jpg

Just got these in
996 with 37011 miles
http://i765.photobucket.com/albums/x...psyv7a3bn8.jpg
http://i765.photobucket.com/albums/x...ps9gbfcooh.jpg
http://i765.photobucket.com/albums/x...psvg4kp4d1.jpg
http://i765.photobucket.com/albums/x...pssortsijr.jpg
http://i765.photobucket.com/albums/x...psbcqnocjk.jpg
1999 tip with 65k
http://i765.photobucket.com/albums/x...pswxfoa1r7.jpg
http://i765.photobucket.com/albums/x...psqafywl81.jpg

What is the story on the black '99 tip you just got in?
 

Flood? I can't see any damage on it.

The immobilizer got wet from a hole in the roof. About half the boxsters I get it's either a busted back window or clogged drain hole that caused the immobilizer to get wet.

Looking for a bose speaker set

Woody, you are an Int'l business man you no? Ship small/medium parts to China and Japan?

I could list you around the blogs here as a source for parts. I can't think how many times I've seen the guys looking for this-and-that here (2nd hand genuine porsche parts are rare here).

Extra business for you if one day you think local demand is not enough already ;)

Sorry I don't have any Bose for the 986, but I do have a 987 with the Bose system
That would be much appreciated! I've shipped all over the world so far but haven't yet to China. I did have a Chinese foreign exchange student buy a top from me. Lol does that count? I even took his old busted one off and put my good one on for no charge.

[QUOTE=itsnotanova;482939]Sorry I don't have any Bose for the 986, but I do have a 987 with the Bose system

woody can you send me photos of what you have? maybe something will be compatible

thanks so much