LOL. I don't have any black ones but I do have a set of 03 seal grey for $50 shipped. I broke a black mounting tab removing them though. I haven't got around to it yet, but I'm going to try and mount mine without the black plastic mounting tabs. The vent has a screw on top and the mounting tab that's glued/molded to the vent in the corner. Those two hold the vent on pretty good. I want to see if there might be a way to discreetly screw it on the bottom too. Those three black mounting tabs are known to break or come loose.

Seal grey on black not the look i'm looking for and don't want to paint, so keep me in mind if you get in a set in black. Happy Holidays!

rear trunk lock and latch...
 

Hello, I'm looking for a rear trunk lock and latch (1st gen boxster) w/micro switch.

But similar could work too, since it for a pure fabrication build, a latch for the clamshell when push rods ect are removed to make it a manual top.

Thx, matt

p.s. the long cable to the drivers door release lever would be great too.

Hi Matt
I have the latches and cable you need for $35 shipped. I like your idea and will be trying it myself.

Dansk hotdog/sausage muffler. Gone, it got traded. http://i765.photobucket.com/albums/x...pspvr6zgvg.jpg
http://i765.photobucket.com/albums/x...psluxx0dra.jpg

looking for a power seat module
 

drivers side 8 way power seat 99 boxster

I think I already sold the one I had. I'll check

need a few things
 

wheel well plastics front, drivers and passenger side.
plastic under car protector rear, driver and pasenger side.
savannah beige seat covers passenger and divers side.

I was headed down to the garage to take pictures and my wife said "Where are you going?" and I said "Going to the garage to take some pictures of some stuff I want to trade". She said "Oh him again?" - You are one a first name basis at my house now... :D

Lmao,,,,
 

Yr name pops up on my paypal first thing...

lol, did you get a chance to mail off that rear lock and latch?
thx, matt

LOL At least you can tell her you're not spending money this way.
I shipped it two days ago with USPS. Sorry I don't have the tracking number handy right now. I threw in two cables so you can choose which one will work better for your application. I think I'm going to use the emergency release cable for mine and not the trunk cable. It's almost the perfect length and has a convenient loop already.

wishlist...
 

pass headlight tray?
headlight plug?
hardtop latch cover?
3 prong plug for speed sensor on trans???
black side mirror covers pr?
plain door sill covers pr?
black carpet for firewall and engine cover?
987 engine cover?
headlight gaskets (@ front edge to body)???lol


Ok, now the last "weird one" ...

black carpet (floors) BUT without any foam sound deadening, and I don't care at all if any damage to "floor" area as mine is covered by separate floor boards wrapped independently in carpet. Just need the sides tunnel and under seats to look ok...


LMAO, thanks Woody, let my know if you can help out on any of this...Matt

2001 Boxster Parts wish list
 

2001 boxster 986

Need parts for Tiptronic 5 speed auto transmission - need Left side driveshaft cover/bearing support assembly. Do not have proper part number - casting marks on piece read 1060 455 001 F1 N1

This picture shows the part is part of the differential.
Cover has three bolts - picture included - cover only needed but will take whole assembly.

Also Underbody plastics.

http://986forum.com/forums/uploads01...1450057054.jpg
Need manual for transmission.

Somebody on here is working on making a reproduction seal available but I don't recall the status... But I sure want a couple :)

Hi,
I don't have any tiptronics or parts for them. I usually sell them whole. I have the front and middle plastic belly pans for $25 each plus shipping. I don't have any transmission manuals but I have a few manual transmissions. lol $300-700

I can't believe these aren't already easily available. 1/3 the headlights I get in the rubber seal is gooey like tar.

986
 

Little bit of a ling shot, looking for a 986 cover and a z-top?
Thanks,

Woody, I need a complete, intact front belly pan when/if you get another one. Also, do you have the guards that go in front of the front wheels?

I am looking for a cupholder out of an 03/04 model. Got anything?

Hey Woody,
I'm looking for a sump plate for a 2002 base 2.7L
Part number 996-107-031-58

Got package carpet great, headlight tray broke
 

Hey woody.
Stuff arrived today carpet is great.
But headlight tray is broken, some bits of plastic in the box
Ddddddoooohhhhh.

I've never even seen a Z-top in person. I keep my 986 covers. They come in handy on keeping cars protected from the sun and rain.
I have the belly pan but those front guards are always missing or broke on the cars that come in
I have a 03/04 cup holder but the front face plate is broke.
I sell all my motors complete and don't have something like that. sorry
It happens this time of the year. I'll get another one shipped to you tomorrow. Sorry


I picked up a 99 today with 175K and a blown tiptronic. Nothing special about it and it doesn't have the double bin or wind mesh.

Memory Seat Parts - 2000 or Earlier
 

Woody,

I know this is a bit of a long shot, but I was wondering whether you had any of the memory seat parts shown in this picture:
Attachment 19966

I'm particularly interested in the trunk control/memory unit that fits in the driver's door sill. I'd also need the wiring that runs from the door sill to the control under the driver's seat. I think that I need a unit from a 2000 or earlier car because they have the mechanical trunk releases.

Thanks

Kevin

I believe I have a 98 and 02 986, and a 2000 996 that had the seat memory option. I'll need to check the condition on them though

Thanks - I'm not exactly sure what I need in terms of wiring, but I expect that there is a connector in the driver's door sill and then one that goes to the module under the driver's seat. I think that connector under the seat would fit into the large vertically oriented terminal that is on the right side of the seat module in this picture:

Got any 03/04s? Need the center dash frame/trim/vent/cup holder housing.

Sent from my SM-G900V using Tapatalk

success
 

the damn shipping co didn't break this one.
thanks. matt

Happen to have a seal grey trunk lid with hinges?

That's good to hear. I've been worried about every package going out for the last two weeks.
I do for $50, but I don't ship large body parts. Where in Texas are you?

Looking for a 986 car cover and stock 986 Boxster or Boxster S muffler...

Thanks for your response!

-Chuck

center rad mounting brackets....
 

Hey Woody,

Seasons greetings.

I'm looking for a set of....

the center radiator mounting brackets (and the assorted clips and screws).

ok if a little bent I can straighten them out.

thx.

ps rack fittings...
 

Hi Woody (again),

I forgot to ask if you have any more steering rack line (ends)
Like what you sent to the EV guy....

thx, Matt

Hi Chuck,
I keep all the car covers that come in. They come in handy for protecting interiors in the early stages of disassembly. I have some mufflers, $50 for a base and $100 for a S. I'll gladly ship you one, but living out there in the land of Porsches. You can probably find one cheaper after shipping is included. I'm guessing $75-100 to ship.
Hi Matt,
I don't get too many center radiators. I usually get $150 for the radiator and brackets when I do have one. The lines I sent Mahendra were only about 4-5 inches long. Unless the car is up on a lift, it's hard to get more. I've started to take those off when I remove the motor and trans. Good power steering lines are in high demand among the spec guys. I have another set of short lines or you can wait for a set to come up that has damage to them farther down?


I've decided to sell some rear speaker boxes I've been holding onto. One is the four speaker box but the speakers are blown. You basically are getting the kit to convert your rear storage box into a four speaker storage box. $50 shipped. The other is the bose subwoofer speaker box out of a 2003 for $150+shipping. I also have the Bose dash and door speak too.

Here's some updated pics of my inventory. Nothing special but the silver box in the middle only has 59k and the suspension is still complete.

http://i765.photobucket.com/albums/x...psim0xzhzl.jpg
http://i765.photobucket.com/albums/x...ps5kvdxnif.jpg
Here's the boxsters that are in the "buzzard yard". Not much left of them
http://i765.photobucket.com/albums/x...psuwcqfvej.jpg
Latest arrival. 99 with lots of miles and a blown tip. The wheels are spoken for and the engine has a sale pending. Sorry, still no wind mesh.
http://i765.photobucket.com/albums/x...psokhu9jup.jpg
http://i765.photobucket.com/albums/x...psg1af4ne6.jpg
Also have the 987 that's mostly still complete and only has 64k. The shifter is spoken for.
http://i765.photobucket.com/albums/x...psmivnszup.jpg
http://i765.photobucket.com/albums/x...pshxnd6xpr.jpg

I am in Greenville, TX. I did a number on my rear trunk lid...
http://i6.photobucket.com/albums/y22...51220_0051.jpg

Woody do you have a set of the fittings for the steering rack?
Short ones ok.
Thx. Matt

Looking for the just the front calipers

I normally have a guy who buys all of my calipers as soon as I get them in. I think he's slowed down and isn't taking this last set for now. I only sell them as a complete set of 4. $415 shipped to NewYork
Thx Woody
UPDATE!! SALE PENDING ON THE LAST SET

I had one of the front guards fall off on an autocross when I hit a cone.... I just left it off...

Woody, happy new year! Maybe you can answer my headlight question:

Are the headlights interchangeable between 986.1 (through 2002) and 986.2 (2003-4) models? If yes, do you have any clean 986.2 lights available?

Thanks!

I only have one left headlight with a burnt inner lens. It's amazing how fast headlights in any condition sell. Headlights and taillights from 97-04 inner change in 30 seconds with no problem.

Thanks, man! Too bad about the lights, but knowing this gives me lots more options. I appreciate your advice.