Woody.

Thanks for the information. I did a bit more research and you are correct, there are a few options...
My problem is that I don't have the MAF from the car to verify the part number.

The car was running great last year when I acquired it (no CEL/etc). Drove for a few months with no issues. I parked it for the last six months and now it is throwing a CEL. Code points to the MAF so I go to pull the MAF and clean it to see if that helps and the plug just falls off it. Also the security screws are gone and regular screws instead. Upon closer inspection the MAF is from a completely different car and the socket where the plug goes was filed down to make the plug fit...

Long story short is I don't know which MAF to use...
Proper fix is probably get the latest MAF and have the software updated to match it?
Any clue what happens if the MAF doesn't match the software version?

Probably a post for a different thread...

Sorry to hijack!

PM Sent.
Thanks!

looking for 2003-2004 clear head lights

No problem. Let me know if the free one doesn't work for you.
Sorry I rarely get those in and they're usually sold quickly

Coolant Expansion Tank
 

Woody,

Looking for a coolant expansion tank for 99 box. Shipping to 90815.

Thanks

Woody,
Looking for a driver side sun visor mirror cover for a 2003 base. Don't need the whole visor.
Thanks

You're better off buying the covers new as I don't think it's possible to remove a used one without breaking it. Pelicanparts sells them for a reasonable price.

Your probably better off buying the whole assy. I read that its near impossable to install just the lid. The assy pops out ver eadily. If you have vanity mirror that is lighted the little harder cause you need to do a little soldering. Check pelican, but sunset or suncoast has the for sure I think the whole assy was around $50.

thanks for the advice!

For those of you who have never ordered from Woody, I want to let you know everything came just as expected. Shipping was fast and was packaged neatly. I will be ordering from him again in the future if I ever need anymore parts.

Thank you....

I just realized this thread was Woody's part selling thread, so I want to apologize on recommending all the new vendors.

Another option would be if Woody had you the whole assembly as well, might save you a few bucks.

Wind Deflector
 

Looking for center wind deflector 2001.

I sell those for $50+shipping. You can text me at 512-925-9171 if you're interested....Thx Woody

Text sent, thank you

Any radios from these?

I only have a few CD23 radios. $100+shipping each

Wind deflector was received on Saturday. Great condition. Thank you

Tail light bulb holders
 

I have a pair of LED taillights that are failing on a car I just bought. They do not have the OEM bulb holders and most of the replacement LED's I have seen need them. Do you have either a pair of LED replacements or the bulb holders? Thanks

Thank you
I sell the bulb holders for $20 plus shipping each. You may want to check with Particlewave on here and see if he can fix them. He's the headlight/taillight wizard around here

Hi Woody,
Need a left-side wind deflector mesh insert thing. Mine decided to leap out at speed and smash itself the other day. Shipped to 97215?
Thanks, Andrew.

Woody, need the fuel line for a 2001 3.2 that connects at the fuel rail. Thanks in advance!

As far as I remember The fuel line for 2001-04 is basically two parts. One goes from the tank to the back of the firewall in the engine bay. From there it's one piece all the way to the injectors. I'm not interested in removing and shipping the long fuel line from the front to the back. As I remember the whole front suspension and fuel tank has to come out to remove it. As for the second section, I have one off a 2002 or 2003 and I believe they're the same as a 2001. The hoses that connect the fuel rails is not transferable. You're better off going to your local autoparts store and getting brand new fuel hoses if that's what you're looking for. I personally would get braided fuel hoses if I were going through the effort

Appreciate the response and the thoughts, and it looks like i'll eventually be going that route. It would be the piece from the firewall into the engine bay. After a Looonngggg time away from the Boxster(back2back deployments), I pulled the engine and planted a groomed donor engine. Everything was pretty straight forward until I attached the fuel line to the rail, first start, everything ran great, 2nd start, leaking fuel everywhere. Ended up being a crack at the plastic right where it meets the base of the cone nipple fitting. My initial thought was staying as OEM as possible, but after a trip to the store for fuel hose, connection fittings(you get the idea)..... eventually i'm going to get this to work.

I am looking for a wheel cap with the gold crest? Mainly just need the emblem.

Woody, I'm looking for the black plastic part that goes right in front of the right rear wheel, at the rocker panel, on an '03 S. (Not sure if other models are the same?)

It's the corner-flare looking piece.

You got one?

Sent from my SM-G930T using Tapatalk

Hi Woody - I'm looking for left and right headlight mounting plates (996-631-041-00, 996-631-042-00) for an '04, shipped to your favorite little town in southcentral PA.

Thanks!

Do you have a passenger side side cover? Rubber deflector in front of rear wheel. TIA

Sorry guys I've been gone all week taking care of my sick mom. She had stage four cancer and beat it once but it has come back. It's always best to text me at 512-925-9171
Lew, you're better off buying new ones off ebay.
Returned your PM
Hi, I sell those for $40 each. but that's odd you need both. Did something happen?
I don't as for some reason they always seem to be beat up or missing the rubber piece on the bottom. You'll probably have to buy that new.
Thanks Woody

So, so sorry to hear about your mother woody.

Sent from my SM-G930T using Tapatalk

Woody says, Lew, you're better off buying new ones off Ebay.

Thanks Woody, I did look on Ebay earlier, and elsewhere, but finally went to Amazon and found the new concave wheels caps for less money than what was listed on Ebay, etc. Amazon listed the new wheel caps for 47 bucks each. With $38 in point credits for using my Amazon Awards charge card. I decided to purchase one for $9 and change. Since one of my Emblems was not looking so good, I decided on two new caps for $57 with free shipping. What a deal! The Dealership wanted 64 bucks each, and was told they keep a well stocked inventory because the Emblems fall off. My advise is to check your wheel cap Emblems. I found the other three on my car were loosely fit.

Looking for a turn signal socket for a 2002 base with halogen headlights.

Thanks.

Are you looking because your wiring has had the plastic crack and break off? You're better off taping the wiring or soldering on new wires. Most of them are at that point right now. Thank the Germans with their biodegradable wiring idea.

Actually I rewired the headlight already thinking that the turn signal fault must be inside the headlight. Turned out it was is a bad socket. It's the white plastic piece that quarter turns into the bottom of the case and holds the turn signal bulb.

I think it's probably been covered here before, but what's the status of Becker radio buttons -- specifically for the CDR-210, is that something you sell? If so do you have one and how much?

Thanks!

I have a $20 shipped minimum if particlewave doesn't have one for free
Hi, I sell the buttons for $50 and they come with an untested radio unit attached and no code. $100 if I have a code.

Hi, I own a 2000 Boxster S manual. I am looking for a few items.
Interior drivers door handle. The spring broke on mine and it causes the window to drop that 1/4" for the roof when parked and raining.
Center console flip up door for the storage unit.

Not sure if this is correct or not but my Immobilizer got wet ( see door handle) and completely fried and I have heard that I could swap out the immobilizer, ignition and key from another car and have it all work. Do you know if this is correct and would you have the parts?

I have an immobilizer, dme and key set for the 2000-02 boxster. Please text me at 512-925-9171 and we can go over the details there. Thanks Woody

How much for an evap canister to 90815?

$25+shipping but I'll need to know what year you need from