Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster and Cayman Classified Ads > Boxster and Cayman Parts for Sale or Wanted

Reply
 
LinkBack Thread Tools Display Modes
Old 11-15-2011, 07:13 PM   #1
Registered User
 
Join Date: Nov 2007
Location: Atlanta GA
Posts: 65
Boxster S items! Transmission, Wheels, Seats

Hey guys....After many years as a Boxster guy, I recently "upgraded" to a 996 Turbo. Now, the turbo transmission has blown up and I need to liquidate this stuff to fix it! HELP!!!

I went on eBay and back to the original sources to see what the value of these items is/was. I have two blown (blown-up not supercharged) 3.2L Boxster engines. For the engines, I looked to see what heads, crankshafts, ignition coils and other internal parts were going for on eBay. I think it is highly likely that one could build a good engine from the second one that was still turning. I can tell you from personal experience that there are very few if any sources for rebuilt engines for these cars.

Engine #1 threw a rod. Engine #2 still runs. I bought the engine used, put it in the car, drove it maybe 100 or 200 miles in town and then went to the track for a DE. It started clattering on the first green lap so I brought it in and shut it down. It may be something fairly simple with that engine but who knows until you go into it? I also have some of the LN upgrades, the Aasco flywheel and the Spec clutch and pressure plate, all of that which has less than 500 miles.

2002 3.2L Boxster S engine with thrown rod. Hole in case. Heads may be ok. $1000


2002 3.2L Boxster S engine with clattering racket. Was running/turning over when pulled from car. $2000

LN Improved IMS Bearing, Ceramic - $500

LN Oil pan extension/deep sump kit: $250

LN magnetic oil drain plug: Sells new for $20

Full intake including, e-gas throttle body $300

Alternator, $50

AC Compressor, $100

Power steering pump $100

Aasco Lightweight Flywheel for Boxster w/ less than 500 miles, $700

Spec clutch w/ sprung disc stage 2 clutch & pressure plate, less than 500 miles, $500

Complete Boxster S engine wiring harness, $75

Boxster 3.2L 6speed transmission, $2000

Two Standard Used Flywheels w/ring gears, $50 ea

Boxster S stock muffler (gutted) w/ cats, $200

Brey-Krause Boxster 986 roll bar extension w/ pads, $600


Brey-Krause Boxster 986 roll hoop camera mount, $75

Boxster Sport Seats, black leather $1000


Tow hitch for Boxster, Cayman, 911, 986, 987, 996, 997 $200


Boxster S 987 18inch wheels w/ 60-80% tires - $1500
(pictured on car above)
__________________
Byron in Atlanta
Byron in Atlanta is offline   Reply With Quote
Old 11-16-2011, 04:31 PM   #2
Registered User
 
Join Date: Nov 2007
Location: Atlanta GA
Posts: 65
Also have a set of stock Boxster 986 taillights, $50
__________________
Byron in Atlanta
Byron in Atlanta is offline   Reply With Quote
Old 11-16-2011, 07:59 PM   #3
Registered User
 
Join Date: Sep 2011
Location: Eureka, CA
Posts: 332
Garage
Still have the physical cars that the engines came from? If the price is right I'd love to buy the chassis :P I'm looking for a canidate for an engine swap. And if the engine is already pulled then all the better. Let me know
Mrmaddbrad is offline   Reply With Quote
Old 11-28-2011, 08:02 AM   #4
Registered User
 
Join Date: Nov 2007
Location: Atlanta GA
Posts: 65
Quote:
Originally Posted by Mrmaddbrad View Post
Still have the physical cars that the engines came from? If the price is right I'd love to buy the chassis :P I'm looking for a canidate for an engine swap. And if the engine is already pulled then all the better. Let me know
No, I am selling the car with a 3.2L engine that I just put in.
__________________
Byron in Atlanta
Byron in Atlanta is offline   Reply With Quote
Old 11-28-2011, 08:03 AM   #5
Registered User
 
Join Date: Nov 2007
Location: Atlanta GA
Posts: 65
Wheels Sold!

Wheels Sold!
__________________
Byron in Atlanta
Byron in Atlanta is offline   Reply With Quote
Old 12-03-2011, 03:52 PM   #6
Registered User
 
Join Date: Nov 2007
Location: Atlanta GA
Posts: 65
Roll Bar Extension Sold!

Roll Bar Extension Sold!
__________________
Byron in Atlanta
Byron in Atlanta is offline   Reply With Quote
Old 01-04-2012, 05:30 AM   #7
Registered User
 
Join Date: Oct 2010
Location: Colorado
Posts: 11
are the sport seats heated? Can you send me pic of the driver side connecting harness? I am trying to figure out if they will connect to my car. I have a 2000 s with power/memory and heated seats.

Also can I use the tow bar for a 1/4" bike rack?

thank you
__________________
01 Boxster S - Polar Silver
07 MB R320 - Love the diesel torque
86 Vanagon Westfalia - Can't get out of its own way
95 Ausi s6 wagon - Does everything
dakar is offline   Reply With Quote
Old 01-04-2012, 05:39 AM   #8
Theoretical propagandist
 
Eric G's Avatar
 
Join Date: Dec 2011
Location: Pacific Northwest
Posts: 793
Garage
Quote:
Originally Posted by Byron in Atlanta View Post
Also have a set of stock Boxster 986 taillights, $50
If these fit a 98' I will take them...
__________________
When life throws you curves, aim for the apex...
Eric G is offline   Reply With Quote
Old 01-12-2012, 05:30 PM   #9
Registered User
 
Join Date: Nov 2007
Location: Atlanta GA
Posts: 65
Sport Seats sold! FYI, they were not heated or power for memory. The taillights will fit a 98 no problem.
__________________
Byron in Atlanta
Byron in Atlanta is offline   Reply With Quote
Old 01-12-2012, 09:54 PM   #10
Registered User
 
Join Date: Jul 2006
Location: san jose
Posts: 225
Can you post more details / pics for the tow hitch ?

Thanks!
vijen6 is offline   Reply With Quote
Old 01-13-2012, 09:37 AM   #11
Registered User
 
Join Date: Nov 2007
Location: Atlanta GA
Posts: 65
Thank vijen....the tow hitch is a variation on one that I bought years ago from Evolution Motorsports. It went under the licence plate , but on the outside of the bumper cover, requiring some cutting of the bumperettes. This new design goes under the bumper cover and is affixed directly to the aluminum bumper at the tow hook. It requires a 4" by 3/8" slit be cut in the bumper cover directly under the licence plate. Also, on newer cars (05 & up), I suggest replacing the bumper mounts with the bumper struts from an older car. With the ball removed the hitch is barely noticeable. Here are some more pics:


Here it is without the ball on my 02:


Here are the stock 05 up bumper mounts:


Here are the bumper struts from an earlier car:


Hitch on 05 Boxster:


With the ball:


Quote:
Originally Posted by vijen6 View Post
Can you post more details / pics for the tow hitch ?

Thanks!
__________________
Byron in Atlanta
Byron in Atlanta is offline   Reply With Quote
Old 01-15-2012, 09:41 PM   #12
Registered User
 
Join Date: Nov 2007
Location: Atlanta GA
Posts: 65
Sport Seats Sold
__________________
Byron in Atlanta
Byron in Atlanta is offline   Reply With Quote
Old 01-21-2012, 09:02 PM   #13
Registered User
 
Join Date: Nov 2007
Location: Atlanta GA
Posts: 65
Stock taillights sold!
__________________
Byron in Atlanta
Byron in Atlanta is offline   Reply With Quote
Old 02-14-2012, 10:52 AM   #14
Registered User
 
Join Date: Jan 2011
Location: Atlanta, GA
Posts: 55
Byron

Do you still Have the LN bearing for sale ?

Blair
I live in Atlanta
blair206 is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page