Boxster S items! Transmission, Wheels, Seats

[Byron in Atlanta]

Hey guys....After many years as a Boxster guy, I recently "upgraded" to a 996 Turbo. Now, the turbo transmission has blown up and I need to liquidate this stuff to fix it! HELP!!!

I went on eBay and back to the original sources to see what the value of these items is/was. I have two blown (blown-up not supercharged) 3.2L Boxster engines. For the engines, I looked to see what heads, crankshafts, ignition coils and other internal parts were going for on eBay. I think it is highly likely that one could build a good engine from the second one that was still turning. I can tell you from personal experience that there are very few if any sources for rebuilt engines for these cars.

Engine #1 threw a rod. Engine #2 still runs. I bought the engine used, put it in the car, drove it maybe 100 or 200 miles in town and then went to the track for a DE. It started clattering on the first green lap so I brought it in and shut it down. It may be something fairly simple with that engine but who knows until you go into it? I also have some of the LN upgrades, the Aasco flywheel and the Spec clutch and pressure plate, all of that which has less than 500 miles.

2002 3.2L Boxster S engine with thrown rod. Hole in case. Heads may be ok. $1000


2002 3.2L Boxster S engine with clattering racket. Was running/turning over when pulled from car. $2000

LN Improved IMS Bearing, Ceramic - $500

LN Oil pan extension/deep sump kit: $250

LN magnetic oil drain plug: Sells new for $20

Full intake including, e-gas throttle body $300

Alternator, $50

AC Compressor, $100

Power steering pump $100

Aasco Lightweight Flywheel for Boxster w/ less than 500 miles, $700

Spec clutch w/ sprung disc stage 2 clutch & pressure plate, less than 500 miles, $500

Complete Boxster S engine wiring harness, $75

Boxster 3.2L 6speed transmission, $2000

Two Standard Used Flywheels w/ring gears, $50 ea

Boxster S stock muffler (gutted) w/ cats, $200

Brey-Krause Boxster 986 roll bar extension w/ pads, $600


Brey-Krause Boxster 986 roll hoop camera mount, $75

Boxster Sport Seats, black leather $1000


Tow hitch for Boxster, Cayman, 911, 986, 987, 996, 997 $200


Boxster S 987 18inch wheels w/ 60-80% tires - $1500
(pictured on car above)

[Byron in Atlanta]

Also have a set of stock Boxster 986 taillights, $50

[Mrmaddbrad]

Still have the physical cars that the engines came from? If the price is right I'd love to buy the chassis :P I'm looking for a canidate for an engine swap. And if the engine is already pulled then all the better. Let me know

[Byron in Atlanta]

Originally Posted by Mrmaddbrad

Still have the physical cars that the engines came from? If the price is right I'd love to buy the chassis :P I'm looking for a canidate for an engine swap. And if the engine is already pulled then all the better. Let me know

No, I am selling the car with a 3.2L engine that I just put in.

[Byron in Atlanta]

Wheels Sold!

[Byron in Atlanta]

Roll Bar Extension Sold!

[dakar]

are the sport seats heated? Can you send me pic of the driver side connecting harness? I am trying to figure out if they will connect to my car. I have a 2000 s with power/memory and heated seats.

Also can I use the tow bar for a 1/4" bike rack?

thank you

[Eric G]

Originally Posted by Byron in Atlanta

Also have a set of stock Boxster 986 taillights, $50

If these fit a 98' I will take them...

[Byron in Atlanta]

Sport Seats sold! FYI, they were not heated or power for memory. The taillights will fit a 98 no problem.

[vijen6]

Can you post more details / pics for the tow hitch ?

Thanks!

[Byron in Atlanta]

Thank vijen....the tow hitch is a variation on one that I bought years ago from Evolution Motorsports. It went under the licence plate , but on the outside of the bumper cover, requiring some cutting of the bumperettes. This new design goes under the bumper cover and is affixed directly to the aluminum bumper at the tow hook. It requires a 4" by 3/8" slit be cut in the bumper cover directly under the licence plate. Also, on newer cars (05 & up), I suggest replacing the bumper mounts with the bumper struts from an older car. With the ball removed the hitch is barely noticeable. Here are some more pics:


Here it is without the ball on my 02:


Here are the stock 05 up bumper mounts:


Here are the bumper struts from an earlier car:


Hitch on 05 Boxster:


With the ball:

Originally Posted by vijen6

Can you post more details / pics for the tow hitch ?

Thanks!

[Byron in Atlanta]

Sport Seats Sold

[Byron in Atlanta]

Stock taillights sold!

[blair206]

Byron

Do you still Have the LN bearing for sale ?

Blair
I live in Atlanta