986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster and Cayman Parts for Sale or Wanted (http://986forum.com/forums/boxster-cayman-parts-sale-wanted/)
-   -   Boxster S items! Transmission, Wheels, Seats (http://986forum.com/forums/boxster-cayman-parts-sale-wanted/31103-boxster-s-items-transmission-wheels-seats.html)

Byron in Atlanta 11-15-2011 07:13 PM

Boxster S items! Transmission, Wheels, Seats
 
Hey guys....After many years as a Boxster guy, I recently "upgraded" to a 996 Turbo. Now, the turbo transmission has blown up and I need to liquidate this stuff to fix it! HELP!!!

I went on eBay and back to the original sources to see what the value of these items is/was. I have two blown (blown-up not supercharged) 3.2L Boxster engines. For the engines, I looked to see what heads, crankshafts, ignition coils and other internal parts were going for on eBay. I think it is highly likely that one could build a good engine from the second one that was still turning. I can tell you from personal experience that there are very few if any sources for rebuilt engines for these cars.

Engine #1 threw a rod. Engine #2 still runs. I bought the engine used, put it in the car, drove it maybe 100 or 200 miles in town and then went to the track for a DE. It started clattering on the first green lap so I brought it in and shut it down. It may be something fairly simple with that engine but who knows until you go into it? I also have some of the LN upgrades, the Aasco flywheel and the Spec clutch and pressure plate, all of that which has less than 500 miles.

2002 3.2L Boxster S engine with thrown rod. Hole in case. Heads may be ok. $1000
http://i271.photobucket.com/albums/j...a/CIMG0296.jpg

2002 3.2L Boxster S engine with clattering racket. Was running/turning over when pulled from car. $2000

LN Improved IMS Bearing, Ceramic - $500

LN Oil pan extension/deep sump kit: $250

LN magnetic oil drain plug: Sells new for $20

Full intake including, e-gas throttle body $300

Alternator, $50

AC Compressor, $100

Power steering pump $100

Aasco Lightweight Flywheel for Boxster w/ less than 500 miles, $700

Spec clutch w/ sprung disc stage 2 clutch & pressure plate, less than 500 miles, $500

Complete Boxster S engine wiring harness, $75

Boxster 3.2L 6speed transmission, $2000

Two Standard Used Flywheels w/ring gears, $50 ea

Boxster S stock muffler (gutted) w/ cats, $200

Brey-Krause Boxster 986 roll bar extension w/ pads, $600
http://i271.photobucket.com/albums/j...a/DSC_0562.jpg

Brey-Krause Boxster 986 roll hoop camera mount, $75

Boxster Sport Seats, black leather $1000
http://i271.photobucket.com/albums/j...a/DSC_0349.jpg

Tow hitch for Boxster, Cayman, 911, 986, 987, 996, 997 $200
http://i271.photobucket.com/albums/j...a/DSC_0008.jpg

Boxster S 987 18inch wheels w/ 60-80% tires - $1500
(pictured on car above)

Byron in Atlanta 11-16-2011 04:31 PM

Also have a set of stock Boxster 986 taillights, $50

Mrmaddbrad 11-16-2011 07:59 PM

Still have the physical cars that the engines came from? If the price is right I'd love to buy the chassis :P I'm looking for a canidate for an engine swap. And if the engine is already pulled then all the better. Let me know :)

Byron in Atlanta 11-28-2011 08:02 AM

Quote:

Originally Posted by Mrmaddbrad (Post 264575)
Still have the physical cars that the engines came from? If the price is right I'd love to buy the chassis :P I'm looking for a canidate for an engine swap. And if the engine is already pulled then all the better. Let me know :)

No, I am selling the car with a 3.2L engine that I just put in.

Byron in Atlanta 11-28-2011 08:03 AM

Wheels Sold!
 
Wheels Sold!

Byron in Atlanta 12-03-2011 03:52 PM

Roll Bar Extension Sold!
 
Roll Bar Extension Sold!

dakar 01-04-2012 05:30 AM

are the sport seats heated? Can you send me pic of the driver side connecting harness? I am trying to figure out if they will connect to my car. I have a 2000 s with power/memory and heated seats.

Also can I use the tow bar for a 1/4" bike rack?

thank you

Eric G 01-04-2012 05:39 AM

Quote:

Originally Posted by Byron in Atlanta (Post 264557)
Also have a set of stock Boxster 986 taillights, $50

If these fit a 98' I will take them...

Byron in Atlanta 01-12-2012 05:30 PM

Sport Seats sold! FYI, they were not heated or power for memory. The taillights will fit a 98 no problem.

vijen6 01-12-2012 09:54 PM

Can you post more details / pics for the tow hitch ?

Thanks!

Byron in Atlanta 01-13-2012 09:37 AM

Thank vijen....the tow hitch is a variation on one that I bought years ago from Evolution Motorsports. It went under the licence plate , but on the outside of the bumper cover, requiring some cutting of the bumperettes. This new design goes under the bumper cover and is affixed directly to the aluminum bumper at the tow hook. It requires a 4" by 3/8" slit be cut in the bumper cover directly under the licence plate. Also, on newer cars (05 & up), I suggest replacing the bumper mounts with the bumper struts from an older car. With the ball removed the hitch is barely noticeable. Here are some more pics:


Here it is without the ball on my 02:
http://i271.photobucket.com/albums/j...IMG_0308-2.jpg

Here are the stock 05 up bumper mounts:
http://i271.photobucket.com/albums/j...a/IMG_0271.jpg

Here are the bumper struts from an earlier car:
http://i271.photobucket.com/albums/j...a/IMG_0273.jpg

Hitch on 05 Boxster:
http://i271.photobucket.com/albums/j...a/DSC_0020.jpg

With the ball:
http://i271.photobucket.com/albums/j...a/DSC_0099.jpg

Quote:

Originally Posted by vijen6 (Post 274032)
Can you post more details / pics for the tow hitch ?

Thanks!


Byron in Atlanta 01-15-2012 09:41 PM

Sport Seats Sold

Byron in Atlanta 01-21-2012 09:02 PM

Stock taillights sold!

blair206 02-14-2012 10:52 AM

Byron

Do you still Have the LN bearing for sale ?

Blair
I live in Atlanta


All times are GMT -8. The time now is 10:19 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website