Wiring harness in an 01 base

[78F350]

Hi Andre, there's a few major problems with that. The 1999 and earlier cars:

• Use a different DME (Engine control module) with a very different connector.
• Have a cable throttle where the later cars are electronic.
• Do not have the 'Resonance Flapper Valve' on the intake that the later cars have.

I think you'll need a harness from a 2000 or 2001 Tiptronic. A 2002 should work, but will need a slight modification for the temp sensor. 2003 and 2004 have a different DME and will need more modification. Pretty sure it can be from either a 2.7L or 3.2L. I don't have any Tiptronic harnesses available.