Quote:
Originally Posted by Tweedboru
Hi , I found the quickest and easiest method was to undo the metal jubilee type clamp on the rubber CV boot. slide the boot back a little way, then you have direct access to the bolts. they are very tight and may need a rattler to undo. Added bonus check CV for grease.
Brian
|
Unnecessary. Use long Allan keys and rotate the axle to expose the bolts. Should not take more than 5 min. per side to disassemble.
__________________
“Anything really new is invented only in one’s youth. Later, one becomes more experienced, more famous – and more stupid.” - Albert Einstein
|
Hybrid Mode
