Rear indicator not working

[boxsterinjapan]

I'm new to Boxster world. Just received my 03 boxster s on Tuesday. The rear, right indicator is not working and I'm getting hyper flash on the front indicator. I switched out the bulb and made sure all connections are in, but nothing is working. Any ideas?

I tried searching but came up with nothing

Thanks in advance

[KRAM36]

Do you have LED lights? Hyper Flashing will happen with too many LED lights. You will need to instal a load resistor.

LED DRL Fog Light Canbus 50W 6ohm Load Resistor Wiring Canceller Decoder H1 EVH | eBay

[boxsterinjapan]

Thanks for the quick reply. I think the car had the hyper blink and no rear indicator before I put in the LEDs. I put in the OEM ones in to check if that was a problem but not solved.

[Smallblock454]

In general hyper flashing front indicators mean that the rear indicators bulbs are not connected to the circuit. I think you have ro check wiring, connectors and bulb sockets.

Regards
Markus

[boxsterinjapan]

Went back and checked all of the wires and turns out there was a loose wire. All fixed! Thanks!