![]() |
Rear indicator not working
I'm new to Boxster world. Just received my 03 boxster s on Tuesday. The rear, right indicator is not working and I'm getting hyper flash on the front indicator. I switched out the bulb and made sure all connections are in, but nothing is working. Any ideas?
I tried searching but came up with nothing Thanks in advance |
Do you have LED lights? Hyper Flashing will happen with too many LED lights. You will need to instal a load resistor.
|
Thanks for the quick reply. I think the car had the hyper blink and no rear indicator before I put in the LEDs. I put in the OEM ones in to check if that was a problem but not solved.
|
In general hyper flashing front indicators mean that the rear indicators bulbs are not connected to the circuit. I think you have ro check wiring, connectors and bulb sockets.
Regards Markus |
Went back and checked all of the wires and turns out there was a loose wire. All fixed! Thanks!
|
All times are GMT -8. The time now is 10:10 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website