Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-25-2008, 04:07 PM   #1
Registered User
 
Join Date: Sep 2006
Location: California
Posts: 713
Quote:
Originally Posted by steve00s
I experience two quirks with the rearend of my car. The first is similar to what you describe. It is most noticeable on the track just past the apex on a turn that requires a sharp turnin. The rearend does kind of a "jog". It comes right back but is a little unnerving. I have 17" wheels and the tires do have some sidewall flex which is what I have attributed most of this to.

Secondly, upon very hard acceleration the backend kicks to the side as I shift from first to second gear. You can really feel the torque from the drive wheel and again can be a little bit unnerving. I attribute this to the lack of a limited slip diffential. I have contemplated whether a LSD would also help with the first issue I described as well. Any thoughts from those who have LSD on how it changes the rearend feel? Is LSD a waste or would it help?
I experience this same problem... It is on the shifts, and especially moreso, on a downshift, that one side tends to squat more than the other. I was wondering if it had to deal with lack of LSD also. Recently I installed a set of adjustable aftermarket rear trailing arms (track arms, as some call them), with the spherical bearings rather than the OEM rubber bushings, and that seemed to have helped a little bit, but I still get some of that same feeling on the shifts/downshifts. I am wondering now, since the addition of the spherical bearing type arms helped to eliminate a bit of that play, that perhaps it could be an issue with the motor mount bushings perhaps? What do you guys think?
__________________
http://farm4.static.flickr.com/3420/...90927559_o.jpg

Some stuff for sale: M030 S 24mm front sway bar, M030 base 19.6mm rear sway bar, 996 GT3 OEM Porsche Motorsport front strut mounts monoball "camber plates"

WTB: looking for some 5-7mm spacers with extended bolts
chaudanova is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page