Porsche Headlight Retrofit [from CAD, prototyping to finish)

[oldskool73]

@PaulE : The white 'buttons' on the side do come out (maybe don't 'need' to but I did), get something under them pry and they should pop out easily, just have little 3 little leg pins holding them in there.

Not seen the corners with the extra retainer, that seems like a much better idea! If you have the old type, heating the legs up with a heat gun or hairdryer for a few seconds first will help them flex a bit and make them less likely to snap off... wish I thought of that that the first time I tried!

[PaulE]

Thanks oldskool73. I didn't know how hard to pry under those white things. After breaking 2 of 3 clips on one corner, and seeing I could get the weatherstrip off with them just slightly raised, I chose that route!

Originally Posted by oldskool73

@PaulE : The white 'buttons' on the side do come out (maybe don't 'need' to but I did), get something under them pry and they should pop out easily, just have little 3 little leg pins holding them in there.

Not seen the corners with the extra retainer, that seems like a much better idea! If you have the old type, heating the legs up with a heat gun or hairdryer for a few seconds first will help them flex a bit and make them less likely to snap off... wish I thought of that that the first time I tried!

[RedBeauty]

Hello! i have recived and installed the projectors. looks great!

Now i just have to do the final adjustments with leveling. I have allready used them alitlebit, and run it with fog + angeleyes at daytime.

my question: is it possible to Connect hi beam to lo beam? so that when i run park lights (angel eyes) and flash hi beam the lights (ballast) become activated? have painted what i'm thinking in, inside the Orange circle.