Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster Racing Forum

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-30-2021, 04:11 AM   #34
Registered User
 
Join Date: May 2019
Location: Deephaven, MN
Posts: 21
Great data above AZ986S. I installed of the accusump on my '01 986 S, in the tunnel, it fits well and seems to be the most logical location.

Here is a video of the results on the track with track tires. I run my oil level about half way between low and full, with this set up I get an accusump dump on almost every corner and even under heavy breaking. Based on the video there are even a few longer corners where the accusump runs dry. Running Mobil 1 0W-40, BTW. Accusump has a 35PSI valve with 10 psi of pre-pressure in the air chamber.

I also run into very low oil pressure at idle post track sessions, i.e 5-7 PSI at idle and 250 F oil temp.

Conclusion: If you're tracking a 986 or 996, strongly consider an Accusump or deeper oil pan, you'll need it.

Video Link - https://youtu.be/lp-PJr1aPtA

Last edited by michaelpetersen3; 06-30-2021 at 04:16 AM.
michaelpetersen3 is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 10:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page