Zaino Lovers

Originally Posted by donv

Love it all -- except Z-8. That stuff is evil... have never got it to look right. Z-6, no problem. Z-8 = splotchy mess.

I have the same problem with Z8. Sal told me that Z8 is super-super concentrated. He recommended cutting small parts of Z8 with distilled water, and then spraying it on the car. Or, if the Z8 streaks, just wipe with a damp (water) cloth, and buff dry.

[Adam]

I bought some Z-5 and it was ok, but it was nothing to write to mom about. It doesn't really cover up the slight swirling as well as expected. The Z2 is an excellent product though and highly reccamended for shine and protection.

[donv]

Thanks! Any tips on the dilution ratio - is it 1 part water to 1 part Z-8, etc?

Originally Posted by bmussatti

I have the same problem with Z8. Sal told me that Z8 is super-super concentrated. He recommended cutting small parts of Z8 with distilled water, and then spraying it on the car. Or, if the Z8 streaks, just wipe with a damp (water) cloth, and buff dry.

Donv, here is what Sal told me in an e-mail:




"NOTE: Z-8 is EXTREMELY concentrated and can be a little finicky in
hot,
humid weather, but it is definetely worth it...

When applying multiple coats of Zaino polish the same day, especially on
darker color vehicles.. I would highly recommend waiting a couple of
hours before appyling Z-8.

If Z-8 should ever streak,... Just wipe the area with a damp towel and
the streaks will disappear.

Z-8 is extremely concentrated, less than 1/3 ounce will do the whole
car. You are applying way too much. Remember less is better with Z-8...

Z-8 is sprayed directly onto the paint surface.

A small dime size is sufficient for a 2 foot section on the car.
Immediately buff with a 100% cotton towel until dry. You will feel the
surface get slicker and slicker. Turn towel frequently. Repeat on next
section until entire car is finished. Do not let Z-8 dry on car. If Z-8
drys by itself just reapply Z-8 to affected area and rebuff until
completely dry. Then get the sunglasses out.

Remember: If Z-8 should ever streak,... Just wipe the area with a damp
towel and the streaks will disappear

NOTE: Definitely do not use Z-8 spray on a hot paint surface. It is
heat activated and will evaporate too fast and will be hard to work
with.

Although I do not recommend the following... If the above fails... Take
a small spray bottle.. Get Distilled Water and dilute the Z-8. Start out
diluting it in small proportions until it works the way you want... "