Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 05-09-2022, 02:01 PM   #1
Registered User
 
Join Date: Oct 2020
Location: KY
Posts: 1,214
Quote:
Originally Posted by blue62 View Post
Start at that sharpe "V" closest to the door. then work slowly to the right. That will lift and roll metal towards the door which will unlock that mess in the lower right and move some metal away from the rear window.
Think of how the pleats in an accordion open and close. As the edges of the pleat move out and up the center ridge opens and drops.
With a "V" as sharpe as the one pointing at the door you want to start as close to the "V" as possible with your pull tab and still move metal.
The sharper the "V" or ridge the more tension or pressure locked up in that area.

Your only going to be able to rough it out because you can't get to the back side with anything.
But you may be able to move enough metal to improve the gap at the window and the door if the door gap was affected.
Then you can level it with Bondo as you said.
So it is more important to get the highs down (gently) then it is to get the lows up.
Thanks again blue. I got sidetracked by the ignition issue and haven't started it yet but I will post pics on progress when able to do so..

Btw, starter, sorry for hijacking your thread

Sent from my SM-G970U1 using Tapatalk
__________________
2000 Box Base, Renegade Stage 1 performance mods complete, more to come
When the owners manual says that the laws of physics can't be broken by this car, I took it as a challenge...
ike84 is offline   Reply With Quote
Old 05-10-2022, 05:20 AM   #2
1998 Boxster Silver/Red
 
Join Date: Sep 2017
Location: 92262
Posts: 3,087
Quote:
Originally Posted by ike84 View Post
Thanks again blue. I got sidetracked by the ignition issue and haven't started it yet but I will post pics on progress when able to do so..

Btw, starter, sorry for hijacking your thread

Sent from my SM-G970U1 using Tapatalk
All good. And... I hear ya about getting sidetracked, lol. Be sure to post some pictures of your dent repair. I wouldn't touch that with a 10-foot pole. You've balls of steel.
__________________
1998 Porsche Boxster
Starter986 is offline   Reply With Quote
Old 05-21-2022, 02:33 AM   #3
1998 Boxster Silver/Red
 
Join Date: Sep 2017
Location: 92262
Posts: 3,087
Wife gets insurance policy documents in the mail... reviews... and tells me, "The credit union doesn't own the Edge anymore, Have the insurance company correct it. It's paid off."

I give the document a quick once-over... see the error... and make a mental note. However, before leaving the document I look into the coverage area and, voila, it appears the Boxster HAS been covered. Comp and collision.

Give my broker a call... Yup. Covered. Also, rental car coverage.

The $1,000 I was prepared to pay out of pocket has been reduced to a $500 deductible ($250 deductible for comprehensive). Insurance agent classified it as collision because, "... moving object on the ground".

Appraiser comes out Tuesday to give it the once over... and the shop will take over from there. For the original $1,000 it just included the quarter repair. I was going to rub off/out the corner of the bumper cover and source a gently used tail light. For $500 I'll jus get everything fixed the right way.

I'm thinking within the next few weeks it'll go into the shop. I'll apprise.

Good morning.
__________________
1998 Porsche Boxster
Starter986 is offline   Reply With Quote
Old 05-21-2022, 03:30 AM   #4
Seal1968
 
Join Date: May 2019
Location: Chatsworth, Canada
Posts: 137
That is a good morning.

Glad this will soon be back to "new". While you're in there, see if they can do a paint correction and polish for extra cash. When my Audi was repaired the body shop did this for me for $600, including repainting the trunk lid. Good luck sir!
Seal1968 is offline   Reply With Quote
Old 05-21-2022, 08:13 AM   #5
Registered User
 
Join Date: Dec 2009
Location: Orange County, CA
Posts: 1,984
That is a nice surprise, congratulations!
Gilles is online now   Reply With Quote
Old 05-21-2022, 08:26 AM   #6
Registered User
 
BruceH's Avatar
 
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,745
Garage
Quote:
Originally Posted by Gilles View Post
That is a nice surprise, congratulations!
Definitely! Have a great weekend
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
BruceH is online now   Reply With Quote
Old 06-09-2022, 02:51 AM   #7
Seal1968
 
Join Date: May 2019
Location: Chatsworth, Canada
Posts: 137
Sorry to hear...the guys at that shop are hacks.

I'd be letting the F-bombs FLY...good on you to be restrained and call your agent.

Geez. Good luck sir.
Seal1968 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 05:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page