|
1997 986 PO 706 error code.
Hey all,
Got a 97 boxster tiptronic with a PO 706 range sensor A circuit fault.
The car recently endured some very high water while parked in a garage.
Halfway up wheels or so. Dried out carpet and interior, removed sump and drained water and oil out. Let car dry for several weeks. Refilled oil and started car. Ran it for 5 minutes and drained oil/filter again. Refilled again and aside from some coffee colored water coming of exhaust (from cats) car runs ok. Drove it up and down the road a few times. Drained oil again. No CEL. Re-installed interior drove a few times up and down the street, and left it running with heater on for a few hours.
Now getting a PO706 range sensor fault. Car will not move but D and R lights flash on tiptronic indicators.
I know I will have to pull the range sensor off the tiptronic. Can this lead to car not moving at all? Is their not a limp mode?
Thanks
|
Threaded Mode
