Oil Change Diaster

[JayG]

Originally Posted by Brian in Tucson

I'd try the 10mm torx socket first, it that doesn't work, drill it and use an easy out. It would be nice if you don't need to drill all the way thru the drain plug, but if you do, catch the first cup and discard, then catch the rest of the oil.

I was gonna suggest pulling the pan completely before you drill, but that would be just incredibly messy.

I always use a brand new, high quality drill for drilling and extracting. Done a few in the past year.

If I was drilling and therefore getting metal fragments in the oil, I would replace ALL of the oil. I wouldn't rick possible engine damage for less than $100 of oil, Hell if you get M1 at wallyworld, its $50 for 10 quatrts

[Brian in Tucson]

Originally Posted by JayG

If I was drilling and therefore getting metal fragments in the oil, I would replace ALL of the oil. I wouldn't rick possible engine damage for less than $100 of oil, Hell if you get M1 at wallyworld, its $50 for 10 quatrts

You're right, of course.