|
Rick3000 and all hands on deck that may know a trick or two!!
That was a good idea. Made sense to me so I tried it. I loaded a CD into the CD Change (Steely Dan) and the changer grabbed the changer jacket made a noise (like it was working in a good way).
I went in the car and it said the CD was loading. It cycled through all 6 CD's said nothing was loaded and went back to the radio. I figured I must have loaded the disk up-side-down.
Now, the changer will not eject the CD jacket. I cannot get it to release it.
So I read some posts on this topic and one of the logical suggestions was to cycle to power to the Changer. Long story short, I removed the changer from its mounting so I could get to the power cable, but I cannot get the cable to separate!! The two arrows line up with each other, but I cannot rotate the plug connector or pull it apart. I don't want to force anything here.
So, it's all back together, but I'm at two losses now; how to program the deck to "see" the AUX and how the heck to get my changer to release that disk!!
HELP!!!
|
Threaded Mode
