Mine did the same and I just used a general heavy duty contact cement. It's been a couple of years and it hasn't come unglued again. It's just a PITA to get to.
Mine did the same and I just used a general heavy duty contact cement. It's been a couple of years and it hasn't come unglued again. It's just a PITA to get to.
Did you have to dismantle It or just pull It out apply the glue and tuck it back in the slot?
Just pulled the top back in place as good and tight as I could in the center and laid down some of this glue in the center area to tack it in spot. It dries quick and holds very strong. Then I followed along the rest of the loose area applying the glue while stretching the top into place. It only takes this glue about 20 seconds or less of you holding the top in place and it's done. Has not came loose since.
__________________
2003 Boxster S
| 987 Air Box | K&N Air Filter | 76mm Intake Pipe| 996 76mm TB | 997 Distribution T | Secondary Cat Delete Pipes | Borla Muffler | NHP 200 Cell Exhaust Headers |
Mena
My car
Hybrid Mode
