Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 12-08-2013, 02:34 PM   #1
Artist, 986S tinkerer
 
NewArt's Avatar
 
Join Date: Aug 2013
Location: Montreal, Canada
Posts: 1,632
what is this?

Preparing my motor for the drop. All plastic parts are brittle in a 12 year old car. Snapped this puppy in half and I don"t know what it is/does. it"s in the middle of a coolant hose in the rear right of the engine compartment.. I think it"s the oil cooler coolant hose.
Thanks!

__________________
James
2004 986 S
987 air intake TB and plenum, Mantissport 2 litre sump, UDP, Bilstein B6 with H&R lowering spings, re71-rs for track, other stuff.
https://www.youtube.com/user/12shoes2
NewArt is offline   Reply With Quote
Old 12-08-2013, 02:38 PM   #2
Registered User
 
jcb986's Avatar
 
Join Date: Apr 2009
Location: Orlando
Posts: 1,266
It's a watchamecallit...also they maybe a Porsche part number on it. If you have a Tip you may be right that it is part the Tip oil cooling system. Now, does it connect to the Tip.

Go here and look, they have schematics so you can see. www.dcauto.com
__________________
http://i768.photobucket.com/albums/x...6/PC120055.jpg

Old Hippie Young Heart
2000 S/3.2 Liter/Tiptronic/Boxster S Sport Package/Cruise Control/Slate Grey Metallic
Red Special Leather Interior/Red Floor Mats/Red Hand Painted Instrument Dials/Roll Bar/Windstop
Small Carbon Package/Leather Wrap Carbon Wheel/Center Console Exterior Color/Alum Carbon Shift Knob
AM/FM Radio w/CD Player & Changer/Digital Sound Package/18" Turbo Wheels/Wheel Caps w/Colored Crest

Last edited by jcb986; 12-08-2013 at 02:46 PM.
jcb986 is offline   Reply With Quote
Old 12-08-2013, 05:07 PM   #3
Artist, 986S tinkerer
 
NewArt's Avatar
 
Join Date: Aug 2013
Location: Montreal, Canada
Posts: 1,632
well, there's the 7.89 that I can see. Not very helpful. I checked out the schematics but I'm not too sure that I can find the corresponding diagram, let alone the part. My car is a 2001, 3.2l tiptronic.
I typed in thingamajig And whatchamacallit into Pelican and ECS but came up with nada.
__________________
James
2004 986 S
987 air intake TB and plenum, Mantissport 2 litre sump, UDP, Bilstein B6 with H&R lowering spings, re71-rs for track, other stuff.
https://www.youtube.com/user/12shoes2
NewArt is offline   Reply With Quote
Old 12-08-2013, 05:49 PM   #4
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,085
Garage
If it is on the coolant hose that runs from the oil cooler to the coolant tank, it's most likely:

996.106.255.00 Flat Connector
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster bought new. Installed used motor at 89k.
1987 924S. 2002 996TT. PST2
Owned and repaired Porsches since 1974. Have driven them all the way the Dr intended...
Paul is offline   Reply With Quote
Old 12-08-2013, 05:52 PM   #5
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,085
Garage
Part Number Description MSRP
996-106-255-00 SS 99610625501 $1.73
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster bought new. Installed used motor at 89k.
1987 924S. 2002 996TT. PST2
Owned and repaired Porsches since 1974. Have driven them all the way the Dr intended...
Paul is offline   Reply With Quote
Old 12-08-2013, 05:57 PM   #6
Artist, 986S tinkerer
 
NewArt's Avatar
 
Join Date: Aug 2013
Location: Montreal, Canada
Posts: 1,632
Thanks Paul, I think you are right. Zodman on the Renntech forum seems to concur with you. I'll double check the hose tomorrow to make sure where it comes from/goes to.
__________________
James
2004 986 S
987 air intake TB and plenum, Mantissport 2 litre sump, UDP, Bilstein B6 with H&R lowering spings, re71-rs for track, other stuff.
https://www.youtube.com/user/12shoes2
NewArt is offline   Reply With Quote
Old 12-09-2013, 09:03 AM   #7
Artist, 986S tinkerer
 
NewArt's Avatar
 
Join Date: Aug 2013
Location: Montreal, Canada
Posts: 1,632
Okay, got it out and took a good look. It's a quick connector. There was a button on it which I was supposed to push (and not pull ) which broke. Then I broke the nipple on one end and the flange disintegrated. But it's just a $2 part.
Thanks for your help!

__________________
James
2004 986 S
987 air intake TB and plenum, Mantissport 2 litre sump, UDP, Bilstein B6 with H&R lowering spings, re71-rs for track, other stuff.
https://www.youtube.com/user/12shoes2
NewArt is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page