Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 02-08-2011, 10:09 AM   #1
Registered User
 
JAAY's Avatar
 
Join Date: Dec 2006
Location: shoreham, ny
Posts: 1,619
part Number needed.

Does anybody know the part numbers for the 996 x51 cast intake manifolds?

__________________
996 3.4 engine with 2.7 986 5speed transmission
Ebay Headers, Fabspeed high flow cats, JIC Cross, IPD Plenum, H&R Coilovers, B&M Short Shifter, AEM Uego Gauge Type Analog, Apexi S-AFC Select, 987 air box, Litronics, 2000 Tails and side markers, painted center console, 18" 987 S-Wheels, GT3 Front bumper with splitter.
JAAY is offline   Reply With Quote
Old 02-08-2011, 10:44 AM   #2
Registered User
 
jaykay's Avatar
 
Join Date: Sep 2009
Location: toronto
Posts: 2,357
Jaay,

I have never been too sure about the x-51 designation and what it denotes. Of course many 986 parts have 996 designations. I have "intake distributors" listed as: 996 110 015 03 for M96.20
996 110 045 01 for M96.21/22 and M96.23/24

These would all be under a 986 parts list. You would likely need a proper 996 listing for your 3.4 and iteration

Perhaps this will lead you in the right direction if nothing else.
__________________
00 986 S....with a few tweaks
jaykay is online now   Reply With Quote
Old 02-10-2011, 02:26 PM   #3
Registered User
 
JAAY's Avatar
 
Join Date: Dec 2006
Location: shoreham, ny
Posts: 1,619
Anybody? My dealer looked at me like I took the short bus there when I asked today about them.
__________________
996 3.4 engine with 2.7 986 5speed transmission
Ebay Headers, Fabspeed high flow cats, JIC Cross, IPD Plenum, H&R Coilovers, B&M Short Shifter, AEM Uego Gauge Type Analog, Apexi S-AFC Select, 987 air box, Litronics, 2000 Tails and side markers, painted center console, 18" 987 S-Wheels, GT3 Front bumper with splitter.
JAAY is offline   Reply With Quote
Old 02-10-2011, 03:52 PM   #4
Registered User
 
Join Date: Jan 2006
Location: Glen Allen, ON
Posts: 312
the cast intake distributors are
996.110.980.40 you need two

the intermediate manifolds are also ported
996.110.983.00, two of these are also required

All the parts for the performance kit are given in a TSB. You can get access to it if you are a contributing renntech member.

-Todd
__________________
Current Cars:
1989 911 Targa
1984 944 Original Owner
1971 911T
tholyoak is offline   Reply With Quote
Old 02-10-2011, 04:35 PM   #5
Registered User
 
JAAY's Avatar
 
Join Date: Dec 2006
Location: shoreham, ny
Posts: 1,619
Todd

I talked to a few people today and it all seems unattainable. Do you have any suggestions?
__________________
996 3.4 engine with 2.7 986 5speed transmission
Ebay Headers, Fabspeed high flow cats, JIC Cross, IPD Plenum, H&R Coilovers, B&M Short Shifter, AEM Uego Gauge Type Analog, Apexi S-AFC Select, 987 air box, Litronics, 2000 Tails and side markers, painted center console, 18" 987 S-Wheels, GT3 Front bumper with splitter.
JAAY is offline   Reply With Quote
Old 02-10-2011, 04:45 PM   #6
Registered User
 
Join Date: Jun 2007
Location: Freeport, New York
Posts: 470
Quote:
Originally Posted by tholyoak
the cast intake distributors are
996.110.980.40 you need two

the intermediate manifolds are also ported
996.110.983.00, two of these are also required

All the parts for the performance kit are given in a TSB. You can get access to it if you are a contributing renntech member.

-Todd
Are these parts the same whether they are for a 3.4 or a 3.6 996 engine?

Regards, Maurice.
schoir is offline   Reply With Quote
Old 02-10-2011, 04:57 PM   #7
Registered User
 
JAAY's Avatar
 
Join Date: Dec 2006
Location: shoreham, ny
Posts: 1,619
Mo. Stop snooping.
__________________
996 3.4 engine with 2.7 986 5speed transmission
Ebay Headers, Fabspeed high flow cats, JIC Cross, IPD Plenum, H&R Coilovers, B&M Short Shifter, AEM Uego Gauge Type Analog, Apexi S-AFC Select, 987 air box, Litronics, 2000 Tails and side markers, painted center console, 18" 987 S-Wheels, GT3 Front bumper with splitter.
JAAY is offline   Reply With Quote
Old 02-11-2011, 05:01 AM   #8
Registered User
 
Join Date: Jan 2006
Location: Glen Allen, ON
Posts: 312
Those part numbers are the 3.6 parts. They would bolt onto any M96 motor. The 3.4X51 was not available in the US. It appears to use the same cast intake manifolds as the 3.6 x51 but I don't have part numbers to verify that.

-Todd

__________________
Current Cars:
1989 911 Targa
1984 944 Original Owner
1971 911T
tholyoak is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 05:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page