Wevo front motor mount - 986 Forum - The Community for Porsche Boxster & Cayman Owners

JAAY · 04-07-2010, 12:52 PM

Once you have taken one of these motors out you will realize that the front motor mount gets its a$$ kicked.. It is a moving part. It moves 100% of the time time the car is running, vibration.

landrovered · 04-09-2010, 02:52 PM

ok so here is the scoop on the Wevo motor mount.

Install: very easy, the poly slides right into the housing and the two side pieces slip right in, you get everything lined up and then tighten the bolts that connect the two inner pieces.

The old mount: it was shot, it was in two pieces and the center fell out after I took the bracket out.

The results: if you want a road car then this mount is not for you. There is a considerable amount of vibration and noise translated through the back of your seat. It is smooth but very noticable. The stiffness of the mount has improved the solid feel of the car and the shifting is more precise than before. The power goes straight to the drivetrain and to the wheels with nothing being lost in the process. The mount changed the character of the car. It feels like a Ferrari or a lamborghini now, there is a caged wild animal and it is right behind you staring at the back of your neck. No need to change the exhaust to get more volume or a deeper sound because when you pull through the revs you can hear and feel the raw power coarsing through the car and you veins. It sounds really good, really good.

Many people will not like this upgrade because it turns your polite boxster into a beast. A bloodthirsty hungry beast that is right behind you.

Me, I absolutely love it, I bought this car because of the big motor and now you cannot ride in it without knowing that this is a very powerful car.

ekam · 04-10-2010, 12:25 PM

Well, with extra 100hp it's almost garantee you will destroy a new stock mount, so going with a stiffer one is not a bad idea.

eightsandaces · 04-10-2010, 01:05 PM

Quote:

Originally Posted by ekam

Well, with extra 100hp it's almost garantee you will destroy a new stock mount, so going with a stiffer one is not a bad idea.

Since they discontinued the old style all mounts are Cayman S or so I was told by Suncoast. A Cayman S has more than 100 more horses so I think a stock unit would do just fine.

landrovered · 04-10-2010, 01:26 PM

I think the Cayman S mount would work but would need to be monitored in my case because the 3.6 does not line up exactly the same as the original 3.4, my front mount was modified with shims by Autometrics, also my rear mounts are not from a boxster they are from a 911. Mine is a special case but what I have learned is that checking the front mount is important as mine was ripped from the housing and just knocking about in the aluminum ring that houses it.