Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 09-02-2007, 11:06 PM   #1
Registered User
 
Join Date: Jul 2006
Location: San Jose California
Posts: 220
I took my side vent off to have the body shop use it to color match my gemballa kit. Just take the screw out and try to pry it out. it comes out. but watch for a plastic clip on the side because it flexes and loops into the holder. you can use a finger to slide it out. there are two other metal clips on the top and bottom that slide out. All in all dont worry pull it out towards you. the plastic vent slits are separate and if you screw up worst comes to worst that would break which shouldnt be costly.
__________________
2001 Boxster S
Gemballa front bumper/Aerokit I Sideskirts/H&R suspension/997 short shift/Schnell front&rear strut brace/Aluminum pedals and floor board//Traffic pro/Console Delete//LED exterior lighting//Exclusive Options Full Leather/19inch Ruf Wheels/European rear bumper with 550 mesh/Zientec spoiler/IPD Plenum//Cold Air Intake/Hardtop/Speedster Humps
Stunin_Stud is offline   Reply With Quote
Old 09-03-2007, 06:22 AM   #2
Registered User
 
Allen K. Littlefield's Avatar
 
Join Date: Oct 2006
Location: New Paltz, NY 12561
Posts: 935
'02 vs '03/04

Stunin, your Boxcar is an '01, mine an '02. What I need to know is if the later '03/04 will replace the earlier vents as they have the vanes included and not separate like ours. When removing the later ones you won't have to fiddle with the interior vanes and of course risk breaking them. Also I am somewhat more fond of the '03 over my '02. Thanks for your input anyway.

AKL
Allen K. Littlefield is offline   Reply With Quote
Old 09-03-2007, 06:41 AM   #3
07 Carrera S Cab
 
Boxtaboy's Avatar
 
Join Date: Nov 2005
Location: New Jersey
Posts: 2,273
Garage
You can easily put the 03-04 side intake vents/duct on your pre-03 model Boxster. It will fit without any issues. You do, however, need to have a bodyshop paint the 03-04 intake ducts because they come unpainted from the dealer parts dept.

To remove yours, just search for the instructions by doing an archive search on this board or ppbb for "desnork", and I'm sure you'll be able to find the link to the instructions.
__________________
Current: 07 Carrera S Cab in Midnight Blue

Previous: 01 Boxster in Arctic Silver, 86 944 in Guards Red
Boxtaboy is offline   Reply With Quote
Old 09-03-2007, 10:35 AM   #4
Registered User
 
Allen K. Littlefield's Avatar
 
Join Date: Oct 2006
Location: New Paltz, NY 12561
Posts: 935
Wink

Quote:
Originally Posted by Boxtaboy
You can easily put the 03-04 side intake vents/duct on your pre-03 model Boxster. It will fit without any issues. You do, however, need to have a bodyshop paint the 03-04 intake ducts because they come unpainted from the dealer parts dept.

To remove yours, just search for the instructions by doing an archive search on this board or ppbb for "desnork", and I'm sure you'll be able to find the link to the instructions.

Thanks Boxtaboy, That is what I was looking for. I figured I would have to have them painted so that expense is anticipated. Do you happen to know what a set of '03 vents would run?

AKL
Allen K. Littlefield is offline   Reply With Quote
Old 09-03-2007, 10:48 AM   #5
bmussatti
Guest
 
Posts: n/a
Quote:
Originally Posted by Allen K. Littlefield
Thanks Boxtaboy, That is what I was looking for. I figured I would have to have them painted so that expense is anticipated. Do you happen to know what a set of '03 vents would run?

AKL
AKL, for pricing, check with www.sunsetporsche.com. Send them an e-mail or give them a call tomorrow morning.
  Reply With Quote
Old 09-03-2007, 02:34 PM   #6
Registered User
 
Join Date: Apr 2006
Location: North New Jersey
Posts: 440
I did it to mine, just a part on each side, I think it was about $140 or so from sunset plus paint.
Or you can just buy my Boxster
__________________
Marc Gelefsky
02 996 Carrera Coupe 6 Speed Aero
86 911 Carrera Targa

http://forums.rennlist.com/rennforum...tar14266_4.gif
EX-88 951, 87 951, 86 944na, 85.5 944na 00 Audi S4..01 Boxster S .etc..etc
Marc Gelefsky is offline   Reply With Quote
Old 09-03-2007, 04:58 PM   #7
Registered User
 
Join Date: Sep 2005
Location: Sacramento
Posts: 3,417
Send a message via AIM to blinkwatt
Quote:
Originally Posted by Marc Gelefsky
I did it to mine, just a part on each side, I think it was about $140 or so from sunset plus paint.
Or you can just buy my Boxster
Was that $140 for both or each?
__________________
-99' Zenith Blue 5-spd...didn't agree with a center divider on the freeway
-01' S Orient Red Metallic 6-spd...money pit...sold to buy a house
blinkwatt is offline   Reply With Quote
Old 09-03-2007, 05:00 PM   #8
Registered User
 
Join Date: May 2006
Location: Annapolis Maryland
Posts: 1,528
Allen,

Sorry I missed your question earlier. I have the later style vents. No modification necessary. Just take yours out and put these in.

__________________
http://i84.photobucket.com/albums/k2...izzlysmall.jpg
'97 986
Cheating Death on 19" Wheels
...no catastrophic engine failure ...yet
Grizzly is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page