Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 05-20-2007, 08:50 AM   #1
Registered User
 
Join Date: Dec 2006
Location: Austin, TX
Posts: 939
Quote:
Originally Posted by rick3000
I didn't want to start a new post so here are some more questions I have.

Is it normal to hear the soft top shifting while it is up when you drive over a bump?

Yes, you'll hear some creaks and groans sometimes, but it shouldn't be too bad. With a car like the Boxster, the body will flex a bit and the top will move a bit as a result.



Do the porsche OEM dash cup holders work well or is the ultimate cupholder better?

The OEM dash cup holders SUCK. Well, for anything larger than a 12oz can, they suck. I bought one of the Ultimate Cupholders, and love it. I highly recommend.


How hard is it to move the a/c to the lowest console position?

Not too hard, you just need to get the correct bezel for it, and run the cables down there. Which actually might be a little tricky. I did the reverse, moved the climate control to the top, and getting the cable back up there was a little tricky.


Is it normal to have the upper dash the hangs over the lower dash (above the shifter boot) not perfectly centered?

Not sure, but I think it should be. If the bottom dash piece is not straight, it might have been removed and not properly reinstalled.

(123456789)
__________________
2001 Boxster - Grey on Grey
1969 911T Targa - 'Stinky'

http://www.zoto.com/frayadjacent/img...f27a-4a399.jpg <---- my car. ^ crap I post.

"The existence of the flamethrower is evidence that someone, somewhere once said 'I want to set those people over there on fire, but I don't want to have to walk over there to do it.'"
FrayAdjacent is offline   Reply With Quote
Old 05-21-2007, 03:28 PM   #2
There Is No Substitute.
 
rick3000's Avatar
 
Join Date: May 2007
Location: West Coast
Posts: 3,253
Garage
I took it in today, there going to have it for about a week and a half, I just hope that anything the plate went out of shape is fixed. I noticed to day the rear wheels were getting angled inward. If that is causing premature axle damage, etc. I hope it is noticable and they fix it. To bad, no boxster fun for a week.
rick3000 is offline   Reply With Quote
Old 05-21-2007, 04:29 PM   #3
Registered User
 
Join Date: Apr 2005
Location: United States
Posts: 367
Is it normal to hear the soft top shifting while it is up when you drive over a bump?

For me, the excessive shifting was caused by a stripped fastener securing the latch mechanism housing to the windshield frame.

If this is the case:

Here's a link on how to remove the roof latch housing:

http://www.renntech.org/forums/index.php?showtopic=4230&view=findpost&p=20543

Here's a link on how I fix mine with tools not normally available at the neighborhood Home Depot:

http://986forum.com/forums/showthread.php?t=2419&highlight=nutserts

Some more reference:

http://www.flat-6.net/forum/showthread.php?t=14020
98Boxster98 is offline   Reply With Quote
Old 05-21-2007, 06:56 PM   #4
There Is No Substitute.
 
rick3000's Avatar
 
Join Date: May 2007
Location: West Coast
Posts: 3,253
Garage
Thanks, but it is not that serious.
rick3000 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page