4.3 Supercharged Chevy

[Qingdao]

FINALLY done with fabrication/welding. (except for the A/C hoses)

The supercharger and carburetor are all mounted up. and the belt is routed... note the poor picture addendum LOL










^^^^ that's a stock idler pulley... I just happened to find a little hole in the ac bracket that had just the right threading and just the right spacing to make for PERFECT supercharger belt wrap.

[Qingdao]

Waiting for the machine shop seems to take forever. But it'll be worth the wait when I have that clean block.

In the mean time I got a fuel tank. And re-furbished it a little. Should fit in the back trunk; at least I hope it fits in the back trunk.



^^^ Electrolysis is the best.



^^^ acid etched with POR15 metal prep.




^^^ and good ole rustolem for the finish.