Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Show and Tell Gallery

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-26-2019, 05:39 AM   #1
Registered User
 
steved0x's Avatar
 
Join Date: Dec 2012
Location: FL
Posts: 4,144
This is my new favorite thread!
steved0x is offline   Reply With Quote
Old 04-26-2019, 05:43 PM   #2
Registered User
 
Join Date: Jul 2013
Location: Bastrop, Tx
Posts: 2,644
Sorry I've been distracted these last few months. The rallycross boxster gets more impressive with every event. We added 17x8.5 with 265 tires in the front on the last event and came away with the number 1 in our class and .10 a second behind the fastest car there (WRX STI). That was with my partner driving. I came in fifth in class. That was behind my partner in first, a professional race car driver who has won at pikes peak in second, third and forth were two guys who race a lot. I'm not sure I'll ever be faster than my partner or the professional, but the other two are in my sights. The next day I took it to another track and got first overall. Needless to say the competition wasn't as strong at that track.

This weekend was suppose to be the next event for both tracks. In preparation for this weekend's race, I've been busy prepping it. There were three major items I wanted to address before this weekend. First was the need to get the motor to rev faster. Sometimes you come off a corner and you're down to 2000 rpm. You have a straight stretch in front of you and it's only 100ft long. I'm sure it's in my head, but it seems like eternity for the motor to reach 4000 or higher. I want power and I want it now!! The boxster is great all over the track but it kills most cars in the straights. I want to slaughter them! The best way to get this motor to rev quick is with a lightweight flywheel. It just so happens that I bought one for my 3.4 boxster. And it just so happens that I'm thinking about converting my 3.4 boxster to an Audi 2.7 turbo motor. So I have this $750 flywheel just sitting there not being used. It seems like the logical thing to do. I can't let the flywheel just sit there. Needless to say the rally boxster will rev up quicker now.

While I was at it I added a clutch disk and pressure plate out of a 3.2. The 3.2 and 3.4 have a narrower disk that help it bite better. I don't recommend doing this upgrade on a 5 speed as the shock can put unneeded stress on the gears. I'm racing in the dirt so my tires will spin. Unlike asphalt or concrete where the tires will grip and that shock goes directly to the gears.
The second thing on my list was a cage. I got the cage from a friend who had in a track toy. He ended up turning the car into a parts car but had left the cage in the car. His wife was sick of looking at it so we struck up a deal. I traded a 6 speed transmission, one axle and one rear upright for what was left of the car. He also threw in two custom axles that are for putting a cayman 6 speed into a 986 boxster.


The rear bumper my partner built was really getting to me. The more I saw it the more I disliked it. Luckily I also got another boxster in and was able to use that bumper. After installing the bumper I threw another quick paint job on the whole car.
After all this prep this week, turns out they cancelled the race for saturday as the track is half water from all the rain we keep getting. My fingers are still crossed that the track for Sunday's race dries out by then
__________________
Woody
itsnotanova is offline   Reply With Quote
Old 04-26-2019, 06:00 PM   #3
Registered User
 
Join Date: Jul 2013
Location: Bastrop, Tx
Posts: 2,644
Drone video of my boxster racing.
https://drive.google.com/file/d/1eWpfvA9bB_MU7xkRURxYUu_ZeNlJBuKX/view?fbclid=IwAR3jQ49hpsClmOZZa0C7rQ9JjQVH3H5vT0hu FyVddKJnFj4kENyt3qal_a8


This is with the new rear bumper and cage
__________________
Woody
itsnotanova is offline   Reply With Quote
Old 04-26-2019, 08:54 PM   #4
Damn Yankee
 
TeamOxford's Avatar
 
Join Date: Mar 2013
Location: Dallas
Posts: 1,117
Garage
That is HELLA cool, Woody !

Thanks for posting.

TO
TeamOxford is offline   Reply With Quote
Old 08-17-2019, 05:23 PM   #5
Registered User
 
jreissenweber1's Avatar
 
Join Date: Jul 2019
Posts: 59
damn ....

just found this thread ..
looks like you are really enjoying yourself ..

thanks for sharing ..

Sent from my SM-G950U using Tapatalk
jreissenweber1 is offline   Reply With Quote
Old 08-22-2019, 09:44 PM   #6
Registered User
 
Join Date: Jul 2013
Location: Bastrop, Tx
Posts: 2,644
Thanks for the interest everyone. Sorry I've been up in Alaska hanging out with my Dad for the last few weeks. Trying to get away from the constant 100+ days we've been getting down here in Texas. On that note about Texas heat. My rallycross boxster does not like when it gets over 90. It can't handle two people racing it at the same event. The last two events it overheated after just a few runs. It might be able to handle just one person racing with it's current cooling system, but not two. At the last event in June my partner and I got in two runs each. On my second run(4th total), it was hovering at 190 at the starting line. By the time I crossed the finish line 1 minute later it had jumped all the way up to being pegged. We let it run for a few minutes and it barely cooled down. The whole system had become heat soaked and wasn't showing any signs of cooling down. We packed it up and went home. I had thought maybe the water pump had gone out but after closer inspection, the pump was in great shape and had recently been replaced. So I've been thinking on how I can rectify this problem. If you look at the whole cooling system, it's not that great. It has puny little base coolant tubes going to only one radiator and a mechanically driven water pump. Address any one of those problems, and it will probably fix the overheating problem on very hot days. I've decided to start with the water pump. I like the idea of using an electric water pump. It gives me the ability to regulate the water flowing through the motor with the engine running or not. I think with the EWP I can come into the pits, shut the motor off but continue to circulate coolant through the system with the electric fans still blowing over the radiator. I'm hoping the few minutes between runs should be enough time to cool everything down. Some other reasons I like the EWP is that it will free up some horsepower and I don't have to worry anymore about little pieces of water pump clogging up a water passage inside the motor.

In preparation of using a EWP, I took a low mile water pump and drimmeled off the propeller. I also removed the thermostat as I'll be controlling the flow of coolant with the EWP. I ordered a Craig Davies water pump. They sell a little LCD control unit too, but I'm to cheap to buy one of those. I plan on using a simple ON/Off toggle switch for now. The EWP was only $200

Jon, That rally Boxster is nice! The 2.7turbo motor is inspiration for my street boxster
__________________
Woody
itsnotanova is offline   Reply With Quote
Old 09-06-2019, 02:18 PM   #7
Registered User
 
Join Date: Jul 2013
Location: Bastrop, Tx
Posts: 2,644
Here's a pic of the modified water pump and thermostat

Here's the new electric water pump installed. As of now i have it wired to run when the ignition is turned on. I tested it today and I'm not quite sure it's going to help. Its in the mid 90's and I let the car idle for about 20 minutes. I then kept the rpms up to 5000 and held it there for about a minute. Towards the end it was creeping past 180. I then shut the motor off but kept the ewp and fan going. The temps didn't drop as quickly as I had hoped. I have a race on Saturday, so that will be the real test as it's suppose to get to 103. Pretty sure I'll need a bigger radiator.
__________________
Woody
itsnotanova is offline   Reply With Quote
Old 10-12-2019, 05:04 AM   #8
Registered User
 
Join Date: Jul 2013
Location: Bastrop, Tx
Posts: 2,644
The electric water pump passed the test. I had two days of racing in 100 degrees and it worked perfectly. The first day of racing I would hook up a spare battery to the car and let the water pump/fan run in between runs. There would be a 15 minute gap between runs and the car would cool down by 20 degrees. The temps never went higher than 180. The cooling system got a real test at the second race. At that race, there was no cool-down time. There was only 5 minutes between runs. Not enough time to even shut the motor down. The coolant side of the cooling system worked great and the coolant temp never went past 190. Now the oil temp was another story. After about the 7th run, the low oil pressure light would come on at idle. For the last three runs I had to keep the rpms up to keep the pressure high enough so the light wouldn't come on.
So after getting it home I put the car on a lift so I could give it the post-race inspection and oil change. I switched to a 10/30 for the upcoming fall/winter racing. I might go with an even thicker oil for next summer. I also inspected the cooling system and discovered that the placement of the electric water pump was not ideal. Air pockets were collecting inside it and that would affect performance and lifespan. The radiator and water pump needed to be moved into a different position. The water pump needs to be lower than the radiator. At first I tried working with the single boxster radiator but I decided if I have to re engineer it, I might as well go with a bigger radiator. I went to the local pick-n-pull with a tape measure. I measured a bunch of radiators but most were too wide. Like Jon, I ended up using a 2001 toyota corolla radiator and cooling fans. It fits perfectly and looks like it holds as much coolant as a single radiator but has a much larger cooling surface. I grabbed the mounting brackets off the corolla and fabricated my own radiator mount.


I also found a set of wheels off a 996 with brand new winter tires on craigslist for $500. That was a rare find here in Texas! Most people use winter tires for racing rallycross if they can't afford real rally tires.
__________________
Woody
itsnotanova is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 11:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page