|
Read this first and then next post below it - then it make sense
Hi Guys,
A couple things I wanted to clear up and hopefully will make life much easier for folks who install our kits in the future. We've included a cage sleeve for quite a while now with our kits, and it is usually already slid onto the cage for buyers. I guess it would help to understand how it works right...as it is not in our DIY which was based on the very first install we did on my '00 Boxster.
The purpose of the cage sleeve is to create a lip on all sides of the cage (the sides, top and bottom). This lip stops the cage from falling through the factory opening, and sits flush to the factory opening. This effortlessly allows you to set the depth and height of the cage, so that you don't need to do any measuring like in the original DIY.
Anyhow, I have included some photos to show how everything comes together...in pictures of course! Just a little preface, this was my Saturday afternoon project converting the '00 Boxster radio surround area to the 03-04 version with the thin cup holder option. The install is complete and it looks awesome and I love my new cup holder, I just have to clean up my car and I'll have some pictures to show in the weeks to come.
|
Threaded Mode
