Input and Output Shaft Seals -- grease or not?

[tonythetiger]

so, now I understand you are referring to the transmission main seal that sits behind the release bearing guide tube. Gotcha. It looks like these have dust shields and the sealing surface.
I have 3.2L 6 speeds, so the setup there is a little different. I have a single seal (no dust shield) that sits back on the shaft 5mm or so. I oil the shaft and drop it in and replace the tube.
carry on.
:+)

[geekdaddy]

OK -- NOW I get it -- thanks for clarifying!

Originally Posted by tonythetiger

so, now I understand you are referring to the transmission main seal that sits behind the release bearing guide tube. Gotcha. It looks like these have dust shields and the sealing surface.
I have 3.2L 6 speeds, so the setup there is a little different. I have a single seal (no dust shield) that sits back on the shaft 5mm or so. I oil the shaft and drop it in and replace the tube.
carry on.
:+)