Tachometer Signal

[jsceash]

Originally Posted by jaykay

Thanks man. This matches with the cluster wire colour which is good news. There was nothing I could find wiring diagram-wise. By any chance can are you aware of which OB2 pin/wire colour is switched 12V???

I used the wire in the center console under the radio Its a 4 pin plug that also has a ground. Green/Black switched 12, Red/Green 12vdc always, Brown GND.

ODB2 pin 16 Red/Black

[jsceash]

I used this for my Traqmate system, until I started to have compatibility problems with GoPro. I switched to AIM with ODB2 bluetooth which was easier mating video to data and direct connect sensor.

[jaykay]

Originally Posted by jsceash

I used the wire in the center console under the radio Its a 4 pin plug that also has a ground. Green/Black switched 12, Red/Green 12vdc always, Brown GND.

ODB2 pin 16 Red/Black

Beautiful yes, I think you are referring to the black connector pictured here in mid-frame. I would dearly love to find a connector that goes in and slice into those leads for all the add ons I am putting in. Any mistakes would not harm the stock harness.

Did you find pins that fit in there?