Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 12-03-2017, 09:31 AM   #1
Artist, 986S tinkerer
 
NewArt's Avatar
 
Join Date: Aug 2013
Location: Montreal, Canada
Posts: 1,821
Quote:
Originally Posted by mikefocke View Post
What are the rules at your track? What mods are allowed? What class are you running in?

What safety improvements have you installed?

Obviously have you done significant time with an instructor? Have you done any instrumented and recorded laps to allow you to review your performance? IOW, have you gotten the most out of the driver?
I hear you mate. The answer to your last question is a resounding NO! However, one doesn’t preclude the other. I’m not racing, just trying to hang with my 911 buddies on the straights.
I have spent quite a bit of time with instructors and will continue to do that on occasion as I continue to improve.
__________________
James now has: 2008 987S 6 speed
Crashed: 2010 987.2 pdk in speed yellow!
Sold to a cool racer chick: 2004 986 S
YouTube channel: the PORSCHE as seen by NewArt
www.youtube.com/channel/UCohdrH2xHTklM1thxk0KKOQ?
NewArt is offline   Reply With Quote
Old 12-04-2017, 03:49 PM   #2
Registered User
 
jsceash's Avatar
 
Join Date: Aug 2009
Posts: 1,466
Garage
Quote:
Originally Posted by NewArt View Post
I hear you mate. The answer to your last question is a resounding NO! However, one doesn’t preclude the other. I’m not racing, just trying to hang with my 911 buddies on the straights.
I have spent quite a bit of time with instructors and will continue to do that on occasion as I continue to improve.
It is very hard to hang with a 911 in the straights with a 986. You need to beat them in the corners, but like Tom and others stated that take training and getting smooth so you can carry more speed before the pedals goes to the floor. But once the pedals go down there isn't much hope if your not carrying more speed than they are out of the corner.

These cars with bigger brakes can enter the corner faster, so brake later and catch them going into the corner. Trail braking does not upset them as quickly, which sets you up so you can be of full throttle much faster sometime even before the apex. The 911 can't do that. Learn these 2 things and you can cut down your corner time by seconds while increasing your exit speed by 10 or more MPH above them.

1. Find 100 pounds to remove from the car, more if you're willing to part with trim and fluff
2. Get a set of Pagig R19 or R29 brake pads. These will not fade and wear like steel.
3. Buy a set of slick tires BF Goodrich R1S, Hankook Z214 or Hoozier R7
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
jsceash is offline   Reply With Quote
Old 12-05-2017, 11:49 AM   #3
Track rat
 
Topless's Avatar
 
Join Date: Nov 2006
Location: Southern ID
Posts: 3,701
Garage
Yep, I am sure there must be some fast 986 cars out there somewhere with just the intake, plenum, throttle body, and re-flash mods, I just haven't seen any. Ever. The 986 guys consistently at the pointy end of the time sheet have 4 things in common: suspension, tires, weight reduction, and talent.

YMMV
__________________
2009 Cayman 2.9L PDK (with a few tweaks)
PCA-GPX Chief Driving Instructor-Ret.
Topless is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page