11-09-2014, 12:13 PM
|
#1
|
|
Beginner
Join Date: Mar 2013
Location: Houston
Posts: 1,659
|
Bank 1 and Bank 2
My Boxster books are packed for a move and my electronic manuals died with a computer so I'm going on memory. If you can, please confirm Bank 1 is on the right side, bank 2 is on the left side of the car with the engine installed. I'm still fighting a P1331 code and want verify I'm working on the correct bank.
__________________
2003 S manual
|
|
|
|
11-09-2014, 12:45 PM
|
#2
|
|
Registered User
Join Date: Dec 2012
Location: FL
Posts: 4,144
|
|
|
|
|
|
11-09-2014, 12:45 PM
|
#3
|
|
Registered User
Join Date: Feb 2005
Location: It's a kind of magic.....
Posts: 6,556
|
Quote:
Originally Posted by Jamesp
My Boxster books are packed for a move and my electronic manuals died with a computer so I'm going on memory. If you can, please confirm Bank 1 is on the right side, bank 2 is on the left side of the car with the engine installed. I'm still fighting a P1331 code and want verify I'm working on the correct bank.
|
Bank #1 is the passenger's side.
__________________
“Anything really new is invented only in one’s youth. Later, one becomes more experienced, more famous – and more stupid.” - Albert Einstein
|
|
|
|
11-09-2014, 12:46 PM
|
#4
|
|
Registered User
Join Date: Dec 2012
Location: FL
Posts: 4,144
|
Edit: Tried to directly link image but couldn't figure it out... The pic is on the page in the previous post.
|
|
|
|
|
11-09-2014, 02:41 PM
|
#5
|
|
Beginner
Join Date: Mar 2013
Location: Houston
Posts: 1,659
|
Quote:
Originally Posted by JFP in PA
Bank #1 is the passenger's side.
|
Ok, that means the passenger side on a left hand drive vehicle? So I'm thinking that means bank one is on the right side of the vehicle?
__________________
2003 S manual
Last edited by Jamesp; 11-09-2014 at 02:51 PM.
Reason: clarity
|
|
|
|
|
11-09-2014, 02:57 PM
|
#6
|
|
Registered User
Join Date: Feb 2005
Location: It's a kind of magic.....
Posts: 6,556
|
Try this:
__________________
“Anything really new is invented only in one’s youth. Later, one becomes more experienced, more famous – and more stupid.” - Albert Einstein
|
|
|
|
|
11-10-2014, 03:38 AM
|
#7
|
|
Registered User
Join Date: Dec 2010
Location: Eastern canada
Posts: 262
|
Hey, this is not a boxster engine, the oil fill tube is pointing towards the front where the drive belts/pulleys are. Or maybe the pulleys are on the wrong end!
|
|
|
|
|
11-10-2014, 05:07 AM
|
#8
|
|
Engine Surgeon
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
|
Bank 1 of the engine is always viewed from the flywheel end looking forward and is on the right. Bank 2 is always on the left side.
No matter which direction the engine is installed in the vehicle, always view from the flywheel end looking forward to keep it simple.
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist
|
|
|
|
|
11-10-2014, 05:15 AM
|
#9
|
|
Registered User
Join Date: May 2014
Location: Ottawa, ON
Posts: 121
|
I ran into this issue years ago when I rebuilt my engine lol!
Remember, the boxster motors are are 180 degrees rotated in relevance to the 911 motors. So bank 2 would be on the left hand side for us and bank 1 would be passenger. (reversed for the Brit's) 
Last edited by ルーカス; 11-10-2014 at 05:20 AM.
|
|
|
|
|
11-10-2014, 11:03 AM
|
#10
|
|
Beginner
Join Date: Mar 2013
Location: Houston
Posts: 1,659
|
Thanks everybody. I thought I had the banks correct but wanted to confirm. So the plot sickens. I replaced the camshaft sensor and still got the error code, swapped sensors between banks and still have the same Durametric reading "spec angle for camshaft 2 = 0.00", along with the error code "P1331 Porsche fault code 903 - Inlet camshaft bank 2 Driver"
I buzzed out the 3 wires from the connector at the sensor to the connector in the trunk and all 3 have continuity (sewing pins work great to probe the connectors btw).
So what is next? Is this a computer problem? Everything looks new, no water or mechanical damage anywhere in the system.
Does anyone know what the signals on those 3 lines are supposed to be or how to buzz them out? Is one of them a 12 volt signal I can check? Just what is a bank 2 driver anyway? I thought I was the driver but apparently not, at least not lately, looks like bank 2 is driving, or not... As always, any help, experience, thoughts, or even wild ideas are appreciated.
__________________
2003 S manual
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 02:44 AM.
| |
Linear Mode
