Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-22-2014, 05:37 AM   #1
Registered User
 
steved0x's Avatar
 
Join Date: Dec 2012
Location: FL
Posts: 4,144
I found a small broken piece of a part labeled 557 in my oil sump pan - Help ID?

Edit: Solved, it is a fragment of my Wix 57211 oil filter that I cut open with aviation snips to inspect the pleats. That is why I didn't see the fragment until much later in the waste oil pan, and I jumped to the wrong conclusion...



This is from when I dropped the oil sump pan cover to install the EBS Racing baffle. The oil pickup tube had little snakes of sealant in there, and there was also a piece of plastic jammed on the outside of the screen. This was the piece. [Edit: it was not the piece, I jumped to the wrong conclusion, this piece was 7mm a side, the bit I found in the screen was much much smaller) this piece was from an oil filter I cut open] I didn't realize it had a number on it but when I was changing the oil on my mower the other day I saw it as I was draining the oil into the pan and realized it had a number.

It is small enough that I wasn't too worried, but now that it has a part number, suddenly I got very worried I have been reading about exploded chain pads; not fun. Also I figured with there being a part number, that would identify the area of the part that was wearing/failing. I figured it was one of the chain tensioners or pads, but none of those part numbers seem to have 557 (as far as I can tell)

So I started hunting around, and found that the oil pickup tube ends with 557. I removed my oil pickup tube when I was cleaning out the sealant, and it looked totally fine to me, with no broken off areas. In my service history I don't see any work done in that area, but then again my history only starts at 60,000 and the I don't believe the sealant on the sump pan was factory. Maybe there was an accident (previous owner drove over a curb and struck the oil pan cover, and it got replaced but the mechanic missed a piece of oil tube plastic?) I am just brainstorming ideas. This fragment looks flat though, and the oil pickup tube seemed to mostly have curved areas.

Does anyone know what this is? or have a new oil pickup tube to see if it has a part number printed on it like this? (called "suction tube") part # 99610707557
It is on this diagram:

Engine Lubrication

Does anyone know of any other plastic parts that have "557" in them besides the oil pickup tube where this could have come from?

thanks,

Steve

PS Searching the various parts resellers for parts containing 557 does not work... blah.. I did find this search that lists every Porsche part that has 557... it is a lot

Last edited by steved0x; 06-02-2014 at 06:06 AM.
steved0x is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page