Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 09-02-2013, 09:22 PM   #1
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Quote:
Originally Posted by BoxsterSteve View Post
Being the cheapskate I am, I'm OK with not having one-touch operation, but I had to have the ability to move the roof without ratcheting the handbrake. It really bothered me to drag the parking brake shoes while the car was rolling. This way, I don't have to.

Many thanks to Guvs on this forum, and dominouk on Boxa.net for pointing me to this relay hack. Guvs had done this on his ride, and pointed me to the necessary info to pull it off.

I've had this mod for over a year now, with no issues.

Although I still have to chop when putting the roof down; this mod lets me put up the top while rolling along slowly, say in traffic as it starts to rain. Whirrrr, just put up the roof as the rain starts, no stopping or handbrake needed.

With this mod, you can operate the top at any speed, so you've got to watch the speedo when the top is in motion. Yes, it is possible to lower or raise the roof at highway speeds, and do major damage to the top & actuating mechanisms. All safeties are disabled by doing this hack.

If you have a 2000+ Boxster with this relay,
you can perform this hack.

Bend over pin 15 & pin 18 as shown. There is no contact with other relays doing this.

Open the relay by gently and evenly prying near the centre of the long sides with 2 small screwdrivers. You will have to tin both ends of a a wire and then solder it to the rear of the circuit board as shown. The solder job must be as flat as possible, because there's not much room as the curcuit board slides in a channel as you close the relay back up.

This mod took under 20 minutes to do, including searcing for an appropriately small gauge wire.

An easy way to achieve the same result without soldering and permanently changing (or risking damaging) the relay is to simply connect a wire to the bent over Pin 15 and connect it to a ground. Done.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor

Last edited by thstone; 09-02-2013 at 09:24 PM.
thstone is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page