Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-10-2013, 11:48 AM   #6
Registered User
 
Join Date: Dec 2009
Location: Orange County, CA
Posts: 1,983
Quote:
Originally Posted by 1olddude View Post
The left one is a piece of cake but anyone that replaced the right one, or says they did, must be a magician or not being truthful.
1Olddude,

First of all, I have Not replaced the transmission mounts on my CS yet...

However, I had replace many tranny and engine mounts on other cars, and sometimes what had worked for me is to remove again the mount that you say it was the easiest one to install and first tackle the most difficult one, because it will allow you to 'jiggle' the transmission just enough to align the all holes for the bolts, once you managed to start the bolts on the difficult side (leaving the bolts loose) you will move tho the other side and once you have all the bolts installed THEN you can tighten them down.

Definitely, if something gets on the way (like the exhaust), remove it to have more room to work, it is time well invested as others are suggesting.

You will fix it properly just take a deep breath and be patient.

Good luck!

.
Gilles is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page