Stahl Wille SF12623 Two Stage Tie Rod Tool

[DWBOX2000]

Stahl Wille SF12623 Two Stage Tie Rod Tool

From the instructions I have for replacing the rear springs, it mentions using the above tool. Is there a cheaper alternative. Amazon lists at about $230.

Thanks,

David

[steved0x]

Yeah the harbor freight version, it is very nice and around $20'ish. You may have to use a grinder to widen the jaws slightly to better handle the LCA ball joint ends. But it may nit be 100% necessary. I was able to do one without widening the jaws, and the other was so frozen I had to.pound it with a pickle fork and a sledge hammer. Luckily I was replacing it

This one:

http://m.harborfreight.com/3-4-quarter-inch-forged-ball-joint-separator-99849.html

[Gelbster]

Kroil or PB Blaster may help .Let it soak/reapply for a few hours or better,overnight.Also use the double hammer trick a few times as you tighten the tool.
https://www.youtube.com/watch?v=z_motcAywkM

[rexcramer]

I love Harbor Freight. They are great for oddball non pro quality tools.

[DWBOX2000]

Thanks guys.

[DWBOX2000]

One other question, since I am removing a ball joint, I will need to put back. Do I need to lube anything or is the ball joint self contained.

Thanks again.