DIY - Replace Rear Upper Control Arms (Track Arms)

[insite]

Originally Posted by CJ_Boxster

Yeah i should add those.... even though i didnt use them myself

They are holding up very well, Now that its getting warmer outside, i can here my front control arms chattering like a mofo. That will be the next arms i buy from debulozparts.

Carlos -

FYI, the fronts don't go bad so often. the more likely culprit is the sway bar drop links. they make the same sound, but are much cheaper to replace ($55 on ebay).

if you do get the front control arms, definitely have it aligned. you can use their adustability to ensure equal caster from side to side. this is a great feature.

[CJ_Boxster]

Originally Posted by insite

Carlos -

FYI, the fronts don't go bad so often. the more likely culprit is the sway bar drop links. they make the same sound, but are much cheaper to replace ($55 on ebay).

if you do get the front control arms, definitely have it aligned. you can use their adustability to ensure equal caster from side to side. this is a great feature.

I checked the front track arms when i was under the car removing the bumper, its definatly the track arms, they have a tiny tiny amount of play to the point that if i wiggle them hard enough, i can hear alittle "tick tick tick" coming from inside the bearing cartridge.

Che, do you have any sets of Front Track arms available?