|
I used this technique today and had the coolant tank and hose manifold out in about 15-20 minutes. I found that the 2nd Dremel step of cutting the flanges off the tank connection was not necessary, I could pull the hose manifold out enough to remove the 3 hoses from the engine side, then move that out of the way and disconnect the cut end of the tank. Thanks so much for this!!
Waiting for a new oil filler hose to arrive then I can put everything back together.
__________________
P Cars: 1997 Spec Boxster - SPB #94 / 2022 Macan GTS / 2018 Panamera Turbo Sport Turismo ---- Other cars: 2021 F-250 Diesel / 2019 Golf R
Gone: 2020 GT4, 2004 GT3, 2003 Carrera, 1982 911SC, 2005 Lotus Elise and lots of other non-Porsches.
PCA National DE Instructor #202106053
|
Threaded Mode
