Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

Post Reply
 
LinkBack Thread Tools Display Modes
Old 12-19-2016, 03:53 AM   #361
Registered User
 
geraintthomas's Avatar
 
Join Date: Nov 2015
Location: South Wales, UK
Posts: 852
So just to clarify, all I'd need to purchase is a 997 75mm throttle body, fit this onto the manifold and the throttle body, and fit the existing intake tube onto the other end of the throttle body? Sorry, seemed to be a couple of things that have changed on this page and the previous page in terms of tubing!

__________________
Porsche Boxster S Type 986

Bi-xenon Headlight Upgrade | 987 S 18" Anthracite Alloys | Android Head Unit | 5000k 55w HID's | 5000k Cree DRL's | 5000k Cree number plate lights | Cree LED Indicators | One-touch roof operation | Bypass exhaust pipes | Parking sensors | Ambient footwell lighting
geraintthomas is offline   Reply With Quote
Old 12-19-2016, 04:58 AM   #362
Registered User
 
mavis.d's Avatar
 
Join Date: Apr 2014
Location: Leeds UK
Posts: 105
Quote:
Originally Posted by geraintthomas View Post
So just to clarify, all I'd need to purchase is a 997 75mm throttle body, fit this onto the manifold and the throttle body, and fit the existing intake tube onto the other end of the throttle body? Sorry, seemed to be a couple of things that have changed on this page and the previous page in terms of tubing!
You will need a Throttle Body and larger intake tube and bends from the MAF to the T/Body. I still have to tidy up the pipework but if you look at my running report in Boxa.net there's a couple of pics. If I'm not too delicate after Christmas tipple on Tuesday I might sort it out then
http://www.boxa.net/forum/index.php?/topic/61193-mavisd-running-report/
mavis.d is offline   Reply With Quote
Old 12-19-2016, 04:18 PM   #363
Ben-Auto-Design
 
Ben006's Avatar
 
Join Date: Oct 2014
Location: French Riviera
Posts: 827
You can't reuse the stock intake tube since it's made for a 68mm TB, the 74mm won't fit inside!

Making an intake tube is just a matter of assembling an aluminum tube and two silicon coupleurs

Mavis, we can't see the page :/
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
Ben006 is offline   Reply With Quote
Old 12-20-2016, 09:46 AM   #364
Registered User
 
mavis.d's Avatar
 
Join Date: Apr 2014
Location: Leeds UK
Posts: 105
Quote:
Originally Posted by Ben006 View Post
You can't reuse the stock intake tube since it's made for a 68mm TB, the 74mm won't fit inside!

Making an intake tube is just a matter of assembling an aluminum tube and two silicon couplers

Mavis, we can't see the page :/
As you can see from the second pic the angle needs to tidied up. The aluminum tube is 76mm and each of the silicon couplings are 76-83mm


mavis.d is offline   Reply With Quote
Old 12-20-2016, 09:56 AM   #365
Registered User
 
Join Date: May 2014
Location: S.California
Posts: 2,029
Mavis - it would be really great if you could specify the adapter coupling - do you mean a 90 degree elbow reducer 76/83mm ? Or a different angle? Like this??
eBay item number: 282061203413

Imagine how much easier your project would be if the airbox was not in the engine bay? Yes , a CAI outside the engine bay - it can be done ! But I don't want to hijack Ben's Thread.
Gelbster is offline   Reply With Quote
Old 12-21-2016, 03:10 AM   #366
Registered User
 
mavis.d's Avatar
 
Join Date: Apr 2014
Location: Leeds UK
Posts: 105
Quote:
Originally Posted by Gelbster View Post
Mavis - it would be really great if you could specify the adapter coupling - do you mean a 90 degree elbow reducer 76/83mm ? Or a different angle? Like this??
eBay item number: 282061203413

Imagine how much easier your project would be if the airbox was not in the engine bay? Yes , a CAI outside the engine bay - it can be done ! But I don't want to hijack Ben's Thread.
It's a 90 degree elbow but I think a 45 might work better so may give it a go with one of those. BTW your ebay number brings up no items
mavis.d is offline   Reply With Quote
Old 12-21-2016, 06:42 AM   #367
Ben-Auto-Design
 
Ben006's Avatar
 
Join Date: Oct 2014
Location: French Riviera
Posts: 827
If you use a 15 degree 3" tube, you need a slightly less than 90 degree coupler for the TB.
A 90degree coupler cut slightly shorter works fine.
I'll post pictures tonight!

Gelbster, you mean an air filter where the snorkle is usually ?
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
Ben006 is offline   Reply With Quote
Old 12-21-2016, 08:50 AM   #368
Registered User
 
Join Date: May 2014
Location: S.California
Posts: 2,029
Quote:
Originally Posted by mavis.d View Post
It's a 90 degree elbow but I think a 45 might work better so may give it a go with one of those. BTW your ebay number brings up no items
Try EBay USA ! It works just fine.
Gelbster is offline   Reply With Quote
Old 12-21-2016, 03:29 PM   #369
Ben-Auto-Design
 
Ben006's Avatar
 
Join Date: Oct 2014
Location: French Riviera
Posts: 827



__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
Ben006 is offline   Reply With Quote
Old 12-25-2016, 03:04 PM   #370
Ben-Auto-Design
 
Ben006's Avatar
 
Join Date: Oct 2014
Location: French Riviera
Posts: 827
Oh, what's that???


Looks like a GT3 TB
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
Ben006 is offline   Reply With Quote
Old 12-28-2016, 09:44 AM   #371
Registered User
 
CrisZenithBlue's Avatar
 
Join Date: Mar 2015
Location: Miami, FL
Posts: 584
cant wait to get in on this action as soon as i finish with maintenance expenses! nothing like a more linear powerband with more usable low end grunt. coming from the honda S2000 i can say i miss the vtec kick at 5500RPM which was pretty damn cool but the reality is you dont get much of that daily driving.

when i met Ben a while back and drove his boxster i could REALLY feel the difference in the powerband and it felt so right, like it was supposed to be like that from factory. i personally like the max power output of the base boxster, it doesnt get you in guaranteed "jail time" speed right away, the only thing i would change is how that power is delivered.

good thing there's guys like Ben making this stuff happen!
CrisZenithBlue is offline   Reply With Quote
Old 12-28-2016, 01:23 PM   #372
Registered User
 
Join Date: May 2014
Location: S.California
Posts: 2,029
Quote:
Originally Posted by Ben006 View Post

Gelbster, you mean an air filter where the snorkle is usually ?
Yes Ben,
I cobbled together an experimental air filter from "UNI" foam and fitted it in the 'tunnel' where the snorkel usually is.It fits behind and is attached to the louvers.One screw and it all slides out.
The use of the tunnel as an air filter housing enables a very compact new arrangement in the engine bay where the old airbox was. Access to the Bank 2 - 4,5,6 inlet manifold area is now excellent from above.
The concept needs proving. And improving. I am (wildly)guessing that I have an acceptable compromise of filtration vs. obstruction.
I also fitted a finer mesh screen(like the997 has) .I also fitted an airflow straightener before the MAF. Who knows if .....
The project was not planed.I had to r&r # 4 injector and the fuel pressure regulator. Try that with the engine and airbox in place and you'll understand.
I am not advocating this as an effective project because I do not have test data.

Last edited by Gelbster; 12-29-2016 at 01:44 PM.
Gelbster is offline   Reply With Quote
Old 12-28-2016, 02:33 PM   #373
l3m
Registered User
 
l3m's Avatar
 
Join Date: Mar 2010
Location: Houston, TX
Posts: 188
I'm selling a 997 throttle body, 997 plenum and misc. hardware. It's listed in the Boxster Parts for Sale section.
__________________
'01 S
l3m is offline   Reply With Quote
Old 01-02-2017, 05:41 PM   #374
Ben-Auto-Design
 
Ben006's Avatar
 
Join Date: Oct 2014
Location: French Riviera
Posts: 827
Quote:
Originally Posted by Gelbster View Post
Yes Ben,
I cobbled together an experimental air filter from "UNI" foam and fitted it in the 'tunnel' where the snorkel usually is.It fits behind and is attached to the louvers.One screw and it all slides out.
The use of the tunnel as an air filter housing enables a very compact new arrangement in the engine bay where the old airbox was. Access to the Bank 2 - 4,5,6 inlet manifold area is now excellent from above.
The concept needs proving. And improving. I am (wildly)guessing that I have an acceptable compromise of filtration vs. obstruction.
I also fitted a finer mesh screen(like the997 has) .I also fitted an airflow straightener before the MAF. Who knows if .....
The project was not planed.I had to r&r # 4 injector and the fuel pressure regulator. Try that with the engine and airbox in place and you'll understand.
I am not advocating this as an effective project because I do not have test data.
I'll take a look at the possibilities when I have the time



The first sold plenum is ready !




You'll notice the four ribs added. Just for security and further stiffening!
You'll also notice that my masking tape game is not the best one yet... ^^

I ordered a 996 plenum too.
I have a GT3 throttle body at home and a guinea pig who's willing to test it on his 996

Ben
__________________
ASE certified Automotive Master Technician.
Porsche Tech in France.
www.benautodesign.fr
Ben-Auto-Design : Performance parts for 9X6 / 9X7
1982 928 S Euro
Ben006 is offline   Reply With Quote
Old 01-04-2017, 06:00 PM   #375
Registered User
 
Join Date: Nov 2009
Location: PA
Posts: 170
how much is this plenum?
geetee is offline   Reply With Quote
Old 01-05-2017, 01:20 AM   #376
Custom User Title Here
 
particlewave's Avatar
 
Join Date: Mar 2012
Location: Ft. Leonard Wood
Posts: 6,164
Garage
Aluminum conducts heat very well and turns all your hard work into a hot air intake, probably negating any possible benefits from the plenum. You'd be much better off with a plastic tube with heat shielding.
particlewave is offline   Reply With Quote
Old 01-05-2017, 08:56 AM   #377
Registered User
 
Join Date: May 2014
Location: S.California
Posts: 2,029
This Plenum is plastic !
Agreed for conductive heat ,but the heat source in this case is radiated and convective,not much conducted because of the' rubber' boots. Which is why polished aluminum or 'chrome' coated ABS are usually used for commercial CAI systems. Spectre products has more info. Heat reflective tape may help ? The air charge in the CAI tube moves fast enough that it won't have time to absorb much excessive heat. Hot-Idling/Dyno would be a problem because of heat soak.
But some Track time would be more valuable than my theorizing.

Last edited by Gelbster; 01-05-2017 at 09:02 AM.
Gelbster is offline   Reply With Quote
Old 01-05-2017, 09:03 AM   #378
Registered User
 
Join Date: Jun 2014
Location: Northeast Ohio
Posts: 67
The DEI gold reflective tape works great. I used it on the engine bay side of a custom airbox in my SCCA ITS Miata (the box was made from sheetmetal) along with some thin silver duct insulation on the filter side. temps were near ambient as a result.
eddy is offline   Reply With Quote
Old 01-05-2017, 10:06 AM   #379
Registered User
 
Join Date: May 2014
Location: S.California
Posts: 2,029
Agreed but use ALuminum/chrome on a Porsche - gold is soooo Ricer !
Gelbster is offline   Reply With Quote
Old 01-05-2017, 10:11 AM   #380
Registered User
 
Join Date: Jun 2014
Location: Northeast Ohio
Posts: 67
It does have greater reflective properties than silver, plus with the race car it was on i wasn't headed to the local cars n coffee our two thread conversations are a welcome distraction from the spreadsheet i should be working on!

eddy is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page