Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-22-2015, 07:33 AM   #35
Registered User
 
Join Date: Aug 2015
Location: San Jose Ca
Posts: 1
Flaps 10,
Thank you for posting your rebuild. I am in similar situation I had a intermixed due to a cracked head. Have done a teardown of the upper end and am on the fence to do a full rebuild. Have read that the cylinders can oval but can't be bored due to no oversized piston & rings not available. Did compression test and was good other than cracked cylinder. I too am considering the EPS roller bearing fix. How many miles have you gone any negative or positive feedback is appreciated. Thanks
365dan is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page